American Journal of Art and Design

| Peer-Reviewed |

Design and Production of Decorative Flower Pot from Plastic Wastes

Received: Apr. 02, 2019    Accepted: May 11, 2019    Published: May 31, 2019
Views:       Downloads:

Share This Article

Abstract

In Ghana, plastic wastes have become social canker. Statistics indicate that more than 120 tones of plastic waste is collected daily and resold to recycling companies, yet the problem still persists. The quantity of plastic wastes generated on daily basis is very alarming and these plastic wastes caused by human activities litter the environment, thereby polluting water bodies, land and the air when the plastics are openly burned. It is against this backdrop, that the researcher seeks to recycle plastic wastes by designing and producing decorative flower pot from plastic wastes as raw materials, in complementing the efforts of the companies. The objective of the study was to find out whether plastic waste materials could be recycled into decorative flower pots. The methods employed were assemblage of plastics bottles, cut and join, and lastly, fold and paste. Samples of plastic waste bottles and sachets were collected from the campuses of Takoradi Technical University and its environs. The plastic sachets were used as linings for the pot and also for making artificial flower, while the plastic waste bottles were used to build the pot with carpenter’s glue as a binding agent. The findings of the study revealed that the flower pot was very portable, non- breakable and stronger as compared with pots made with clay. It was recommended, among others that, visual artists and artisans could practice this mode of recycling plastic waste to foster creativity, self- expression and skills development.

DOI 10.11648/j.ajad.20180304.11
Published in American Journal of Art and Design ( Volume 3, Issue 4, December 2018 )
Page(s) 33-41
Creative Commons

This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.

Copyright

Copyright © The Author(s), 2024. Published by Science Publishing Group

Keywords

Plastic Wastes, Flower Pot, Sachets, Bottles

References
[1] Andrady, A. L. & Neal, M. A. (2009). “Applications and Societal Benefits of Plastics”. Phil. Trans. R Soc. B 364, 1977- 1984 (doi: 10.1098/rstb. 2008.0304)
[2] Sheavly, S. B. (2005). Sixth meeting of the UN open-ended informal consultative processes on oceans & the law of the sea. Marine debris – an overview of a critical issue for our oceans. June 6 – 10, 2005. Retrieved from http://www.un.org/Depts/los/consultative_ process/consultative_ process.htm. [Accessed Date: 6th September, 2018].
[3] Andrady, A. (1994). “Assessment of Environmental Biodegradation of Synthetic Polymers”. Polym. Rev. 34, 25-76. (doi: 10.1080/15321799408009632)
[4] Swift, G. & Wiles, D. (2004). “Degradable Polymers and Plastics in Landfill Sites”. Encyclopedia Polym. Sci. Technol. 9, 40-51.
[5] Kyrikou, I, & Briassoulis, D. (2007). “Biodegradation of Agricultural Plastic Films: A Critical Review”. J. Polym. Environ. 15, 125-150. (doi: 10.1007/s10924-007-0053-8).
[6] Botwe, E. (2019). “Plastic Producers want Law on Recycling”. The Ghana Plastic Manufacturers Association (GPMA). Daily Graphic. Vol. 20979. May 9, 2019; p.61. Accra, Ghana.
[7] Daily Graphic. “Ghana loses Gh cedi 75 million annually for poor sanitation delivery”. Vol.19424, April, 2, 2014; p.65. Accra, Ghana.
[8] Antwi, M. K. (2004). “Indiscriminate disposal of plastic waste affects food chain”. Ghana News Agency (GNA), Cape Coast, July 9, 2004. Retrieved from htpp://modernghana.com/news/58502/1/indiscriminate-disposal-of-plastic-waste-affects-f.html. [Accessed Date: 13th May, 2018].
[9] Gyamfi, D. (2014). “Effects of Plastics as Food Storage Material”. Research Assistant, University of Ghana Medical School, Accra. Panel discussion on consumer watch- TV3 programme. [Telecast Date: 25th May, 2014].
[10] Essel, K. (2014). “Effects of Plastics as Food Storage Material”. Head, Department of food division. Food and Drug Authority (FDA), Accra. Panel discussion on consumer watch- TV3 programme. [Telecast Date: 25th May, 2014].
[11] Abota, C. A. (2010). “Recycling of Plastic Waste in Ghana; A Way to Reduce Environmental Problems/Pollutions”. Degree Thesis. Plastic Technology. Arcada.
[12] Document of the World Bank for Ghana (2013). Report No. 76369 – GH. Retrieved from http://www.document.worldbank.org. [Accessed Date: 20th July, 2018].
[13] United State Environmental Protection Agency (USEPA). (2003). “The Hidden hazards of Backyard Burning” Brochure. USEPA office of solid waste and emergency response, EPA 530-F-03-112, August. Available at http://www.epa.gov/epaoswer/non-hw/muncpl/backyard/pubs/residents.pdf. [Accessed Date: 31st July, 2017].
[14] Food Production Daily (2005). Are biodegradable plastic bags the answer to cutting waste (online). Retrieved from www.foodproductiondaily.com/news/printNewsBis.asp?id=56190. [Accessed Date: 18th August, 2017].
[15] Aggarwal, R. (2010). “Recycle and Reuse of Textiles”. Retrieved from http://www.techno-preneur.net/information-desk/sciencetechmagazine/2010/april10/Reuse-Textiles. [Accessed Date: 10th May, 2017].
Cite This Article
  • APA Style

    Kofi Asante-Kyei. (2019). Design and Production of Decorative Flower Pot from Plastic Wastes. American Journal of Art and Design, 3(4), 33-41. https://doi.org/10.11648/j.ajad.20180304.11

    Copy | Download

    ACS Style

    Kofi Asante-Kyei. Design and Production of Decorative Flower Pot from Plastic Wastes. Am. J. Art Des. 2019, 3(4), 33-41. doi: 10.11648/j.ajad.20180304.11

    Copy | Download

    AMA Style

    Kofi Asante-Kyei. Design and Production of Decorative Flower Pot from Plastic Wastes. Am J Art Des. 2019;3(4):33-41. doi: 10.11648/j.ajad.20180304.11

    Copy | Download

  • @article{10.11648/j.ajad.20180304.11,
      author = {Kofi Asante-Kyei},
      title = {Design and Production of Decorative Flower Pot from Plastic Wastes},
      journal = {American Journal of Art and Design},
      volume = {3},
      number = {4},
      pages = {33-41},
      doi = {10.11648/j.ajad.20180304.11},
      url = {https://doi.org/10.11648/j.ajad.20180304.11},
      eprint = {https://download.sciencepg.com/pdf/10.11648.j.ajad.20180304.11},
      abstract = {In Ghana, plastic wastes have become social canker. Statistics indicate that more than 120 tones of plastic waste is collected daily and resold to recycling companies, yet the problem still persists. The quantity of plastic wastes generated on daily basis is very alarming and these plastic wastes caused by human activities litter the environment, thereby polluting water bodies, land and the air when the plastics are openly burned. It is against this backdrop, that the researcher seeks to recycle plastic wastes by designing and producing decorative flower pot from plastic wastes as raw materials, in complementing the efforts of the companies. The objective of the study was to find out whether plastic waste materials could be recycled into decorative flower pots. The methods employed were assemblage of plastics bottles, cut and join, and lastly, fold and paste. Samples of plastic waste bottles and sachets were collected from the campuses of Takoradi Technical University and its environs. The plastic sachets were used as linings for the pot and also for making artificial flower, while the plastic waste bottles were used to build the pot with carpenter’s glue as a binding agent. The findings of the study revealed that the flower pot was very portable, non- breakable and stronger as compared with pots made with clay. It was recommended, among others that, visual artists and artisans could practice this mode of recycling plastic waste to foster creativity, self- expression and skills development.},
     year = {2019}
    }
    

    Copy | Download

  • TY  - JOUR
    T1  - Design and Production of Decorative Flower Pot from Plastic Wastes
    AU  - Kofi Asante-Kyei
    Y1  - 2019/05/31
    PY  - 2019
    N1  - https://doi.org/10.11648/j.ajad.20180304.11
    DO  - 10.11648/j.ajad.20180304.11
    T2  - American Journal of Art and Design
    JF  - American Journal of Art and Design
    JO  - American Journal of Art and Design
    SP  - 33
    EP  - 41
    PB  - Science Publishing Group
    SN  - 2578-7802
    UR  - https://doi.org/10.11648/j.ajad.20180304.11
    AB  - In Ghana, plastic wastes have become social canker. Statistics indicate that more than 120 tones of plastic waste is collected daily and resold to recycling companies, yet the problem still persists. The quantity of plastic wastes generated on daily basis is very alarming and these plastic wastes caused by human activities litter the environment, thereby polluting water bodies, land and the air when the plastics are openly burned. It is against this backdrop, that the researcher seeks to recycle plastic wastes by designing and producing decorative flower pot from plastic wastes as raw materials, in complementing the efforts of the companies. The objective of the study was to find out whether plastic waste materials could be recycled into decorative flower pots. The methods employed were assemblage of plastics bottles, cut and join, and lastly, fold and paste. Samples of plastic waste bottles and sachets were collected from the campuses of Takoradi Technical University and its environs. The plastic sachets were used as linings for the pot and also for making artificial flower, while the plastic waste bottles were used to build the pot with carpenter’s glue as a binding agent. The findings of the study revealed that the flower pot was very portable, non- breakable and stronger as compared with pots made with clay. It was recommended, among others that, visual artists and artisans could practice this mode of recycling plastic waste to foster creativity, self- expression and skills development.
    VL  - 3
    IS  - 4
    ER  - 

    Copy | Download

Author Information
  • Department of Ceramic Technology, Takoradi Technical University, Takoradi, Ghana

  • Section