| Peer-Reviewed

Catalytic Activity of Cobalt-Molybdenum in Gas-Phase Ketonisation of Pentanoic Acid

Received: 26 March 2018    Accepted: 16 April 2018    Published: 8 May 2018
Views:       Downloads:
Abstract

Ketonisation of pentanoic acid over bulk cobalt-molybdenum and its supported catalysts in the gas-phase was investigated using a fixed bed reactor under atmospheric pressure at 320-420°C. Compared to other supported catalysts, 20% Co-Mo/Al2O3 demonstrated the best catalytic performance and stability giving to give 95% 5-nonanoe selectivity at 91% pentanoic acid conversion at 308°C and ambient pressure for 5 h time on stream (TOS).However, its stability was e for 15 h TOS with small catalytic deactivation. In this study, catalytic characterization was determined using TGA and BET surface area analyses while acidity was measured using FTIR spectroscopy.

Published in Science Journal of Chemistry (Volume 6, Issue 1)
DOI 10.11648/j.sjc.20180601.12
Page(s) 11-16
Creative Commons

This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.

Copyright

Copyright © The Author(s), 2024. Published by Science Publishing Group

Keywords

Ketonisation, Pentanoic Acid, Co-Mo Catalysts, Supported Catalysts, 5-Nonanone

References
[1] E. L. Kunkes, D. A. Simonetti, R. M. West, J. C. Serrano-Ruiz, C. A. Gartner, J. A. Dumesic, Science, 322, 2008, 417-421.
[2] C. A. Gaertner, J. C. Serrano-Ruiz, D. J. Braden, J. A. Dumesic, Journal of Catalysis, 266, 2009, 71-78.
[3] C. A. Gaertner, J. C. Serrano-Ruiz, D. J. Braden, J. A. Dumesic, ChemSusChem., 2, 2009, 1121-1124.
[4] E. Karimi, C. Briens, F. Berruti, S. Moloodi, T. Tzanetakis, M. J. Thomson, M. Schlaf, Energy Fuel, 24, 2010, 6586-6600.
[5] Ryan W. Snell, Brent H. Shonks, Applied Ctalysis A: General, 451, 2013, 86-93.
[6] M. A. Hasan, M. I. Zaki, I. Pasupulety. Applied Catalysis A: General, 243, 2003, 81-92.
[7] M. A. Alotaibi, E. F. Kozhevnikova and. V. Kozhevnikov, Applied Catalysis A: General, 2012, 447-448, 32-40.
[8] H. Bayahia, E. Kozhevnikov and I. Kozhevnikov, Chemical Communication, 2013, 49, 3842-3844.
[9] M. Renz, European Journal of Organic Chemistry, 2005, 979-988.
[10] T. N. Pham, T. Sooknoi, S. P. Crossley and D. E. Resasco, ACS Catalysis, 2013, 3, 2456-2473.
[11] A. D. Murkute, J. E. Jackson and D. J. Miller, Journal of Catalysis, 2011, 278, 189-199.
[12] T. Yokoyama and N. Yamagata, Applied Catalysis A: General, 2001, 221, 227-239.
[13] J. A. Martens, M. Wydoodt, P. Espeel and P. A. Jacobs, Editon edn., 1993, vol. 78, pp. 527-534.
[14] O. Nagashima, S. Sato, R. Takahashi and T. Sodesawa, Journal of Molecular Catalysis A: Chemical, 2005, 227, 231-239.
[15] C. A. Gaertner, J. C. Serrano-Ruiz, D. J. Braden and J. A. Dumesic, Industrial and Engineering Chemistry Research, 2010, 49, 6027-6033.
[16] H. Benaissa, P. N. Davey, Y. Z. Khimyak and I. V. Kozhevnikov, Journal of Catalysis, 2008, 253, 244-252.
[17] H. Benaissa, P. N. Davey, E. F. Kozhevnikova and I. V. Kozhevnikov, Applied Catalysis A: General, 2008, 351, 88-92.
[18] M. Gliński, and J. Kijeński, Applied Catalysis A, General, 2000, 190, 87-91.
[19] H. Bayahia, E. F. Kozhevnikova and I. V. Kozhevnikov, Applied Catalysis B: Environmental, 2015, 165, 253-259.
[20] Stephen D. Davidson, Kurt A. Spies, Donghai Mei, Libor Kovarik, Igor Kutnyakov, Xiaohong S. Li, Vanessa Lebarbier Dagle, Karl O. Albrecht, and Robert A. Dagle, ACS Sustainable Chem. Eng., 5 (10), 2017, 9136–9149.
[21] Mohammed Saad Mutlaq Al-Ghamdi and Hossein Bayahia, Mediterranean Journal of Chemistry, 6, 2017, 1-6.
[22] Hossein Bayahia, Asian Journal of Chemistry, 28, 2016, 2744-2748.
[23] Hossein Bayahia, Journal of Taibah University for Science, DIO: 10.1080/16583655.2018.1451064, 2018, 1-6. https://doi.org/10.1080/16583655.2018.1451064
[24] A. Aoussi, A. W. Apblett, Z. A. Al-Othman and A. Al-Amro, Transition Metal Chemistry, 35, 927, 2010.
[25] C. S. Song, C. S. Hsu, and I. Mochida, Chemistry for Desel, Applied Energy Technology series, 140, 2000.
[26] M. Arend, T. Nonnen, W. F. Hoeldrich, J. Fischer, and J. Groos, Applied Catalyst: A, 447, 32, 2013.
[27] Morris D. Argyle and Calvin H. Bartholomew, Catalysis, 2015, 5(1), 145-269.
Cite This Article
  • APA Style

    Hossein Bayahia. (2018). Catalytic Activity of Cobalt-Molybdenum in Gas-Phase Ketonisation of Pentanoic Acid. Science Journal of Chemistry, 6(1), 11-16. https://doi.org/10.11648/j.sjc.20180601.12

    Copy | Download

    ACS Style

    Hossein Bayahia. Catalytic Activity of Cobalt-Molybdenum in Gas-Phase Ketonisation of Pentanoic Acid. Sci. J. Chem. 2018, 6(1), 11-16. doi: 10.11648/j.sjc.20180601.12

    Copy | Download

    AMA Style

    Hossein Bayahia. Catalytic Activity of Cobalt-Molybdenum in Gas-Phase Ketonisation of Pentanoic Acid. Sci J Chem. 2018;6(1):11-16. doi: 10.11648/j.sjc.20180601.12

    Copy | Download

  • @article{10.11648/j.sjc.20180601.12,
      author = {Hossein Bayahia},
      title = {Catalytic Activity of Cobalt-Molybdenum in Gas-Phase Ketonisation of Pentanoic Acid},
      journal = {Science Journal of Chemistry},
      volume = {6},
      number = {1},
      pages = {11-16},
      doi = {10.11648/j.sjc.20180601.12},
      url = {https://doi.org/10.11648/j.sjc.20180601.12},
      eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.sjc.20180601.12},
      abstract = {Ketonisation of pentanoic acid over bulk cobalt-molybdenum and its supported catalysts in the gas-phase was investigated using a fixed bed reactor under atmospheric pressure at 320-420°C. Compared to other supported catalysts, 20% Co-Mo/Al2O3 demonstrated the best catalytic performance and stability giving to give 95% 5-nonanoe selectivity at 91% pentanoic acid conversion at 308°C and ambient pressure for 5 h time on stream (TOS).However, its stability was  e for 15 h TOS with small catalytic deactivation. In this study, catalytic characterization was determined using TGA and BET surface area analyses while acidity was measured using FTIR spectroscopy.},
     year = {2018}
    }
    

    Copy | Download

  • TY  - JOUR
    T1  - Catalytic Activity of Cobalt-Molybdenum in Gas-Phase Ketonisation of Pentanoic Acid
    AU  - Hossein Bayahia
    Y1  - 2018/05/08
    PY  - 2018
    N1  - https://doi.org/10.11648/j.sjc.20180601.12
    DO  - 10.11648/j.sjc.20180601.12
    T2  - Science Journal of Chemistry
    JF  - Science Journal of Chemistry
    JO  - Science Journal of Chemistry
    SP  - 11
    EP  - 16
    PB  - Science Publishing Group
    SN  - 2330-099X
    UR  - https://doi.org/10.11648/j.sjc.20180601.12
    AB  - Ketonisation of pentanoic acid over bulk cobalt-molybdenum and its supported catalysts in the gas-phase was investigated using a fixed bed reactor under atmospheric pressure at 320-420°C. Compared to other supported catalysts, 20% Co-Mo/Al2O3 demonstrated the best catalytic performance and stability giving to give 95% 5-nonanoe selectivity at 91% pentanoic acid conversion at 308°C and ambient pressure for 5 h time on stream (TOS).However, its stability was  e for 15 h TOS with small catalytic deactivation. In this study, catalytic characterization was determined using TGA and BET surface area analyses while acidity was measured using FTIR spectroscopy.
    VL  - 6
    IS  - 1
    ER  - 

    Copy | Download

Author Information
  • Chemistry Department, Faculty of Science, Albaha University, Albaha, Saudi Arabia

  • Sections