This study details the design and construction of an Analog Water Heater Chamber (AWHC) specifically tailored for tensile testing of Shape Memory Alloy (SMA) rods and springs. The AWHC is designed to simulate various temperature conditions, enabling precise control over the thermo-mechanical behavior of SMA specimens. Energy conversion from the electrical to heat form is achieved using an electrical heating element of 1000 watts. This heat is transferred to the SMA spring/wire using convection using a water medium, and phase transformation occurs. The chamber's unique design allows for real-time monitoring of deformation and recovery processes under controlled temperature and loading conditions. Different test results for both the SMA rod and SMA spring at various loading rates and constant temperature, and continuous loading rate and different temperatures showed a good thermo-mechanical coupling result The AWHC's performance was validated through tensile testing of SMA rods and springs, demonstrating its efficacy in evaluating the mechanical properties and phase transformation temperatures of these materials. The results show excellent correlation with theoretical predictions, confirming the AWHC's suitability for characterizing SMA behavior under diverse thermal and mechanical conditions. This research contributes to the development of efficient testing protocols for SMA components, paving the way for their enhanced integration into various engineering applications, thus the aim of which AWHC is designed for is achieved.
| Published in | American Journal of Physics and Applications (Volume 12, Issue 3) |
| DOI | 10.11648/j.ajpa.20241203.12 |
| Page(s) | 62-68 |
| Creative Commons |
This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited. |
| Copyright |
Copyright © The Author(s), 2024. Published by Science Publishing Group |
Water Bath Temperature, Shape Memory Alloys, Martensitic Transformation, Thermo-Mechanical Coupling
| [1] | G. E. Moatasem Fouda, Mohammad Tawfik, “Calibration of The Hysteresis Loop of SMA Wires Heated by Electric Current,” in 15th International Conference on Applied Mechanics and Mechanical Engineering, 2012. |
| [2] | J. A. J. Zurbitu, A. Agirregomezkorta, M. Sarrionandia, G. Castillo, “SETTING UP OF PULL-OUT TEST AT IMPACT STRAIN,” in ICCM17proceedings., 2011. |
| [3] | M. K. Mehdi Kamarni, “An Investigation into the Simple Tensile Test of SMA Wires Considering Stress Concentration of Grippers,” J. Mater. Eng. Perform., vol. 23, pp. 1114–1123, 2014. |
| [4] | H. H. and J. H. Jianzuo Ma, “Characteristics Analysis and Testing of SMA Spring Actuator,” Adv. Mater. Sci. Eng., vol. 10.1155, p. 7, 2013. |
| [5] | F. W. Wilburn, “Introduction to thermal analysis, techniques and applications,” Thermochimica Acta, vol. 155. pp. 383–385, 1989. |
| [6] | S. Degeratu, N. G. Bizdoaca, G. Manolea, I. Diaconu, A. Petrisor, and V. Degeratu, “On the design of a shape memory alloy spring actuator using thermal analysis,” WSEAS Trans. Syst., vol. 7, no. 10, pp. 1006–1015, 2008. |
| [7] | J. B. SANTIAGO, J. J. M.; SILVA, P., C., S.,; ARAUJO, C. J.; SIMOES, “MECHANICAL BEHAVIOR OF Ni-Ti SMA HELICAL SPRINGS MANUFACTURED BY INVESTMENT CASTING,” 24th ABCM Int. Congr. Mech. Eng., vol. 5, pp. 1–8, 2017. |
| [8] | “Differential Scanning Calorimetry Techniques Applications in Biology and Nanoscience”. |
| [9] | Lutz, J. (2020). "Energy consumption and efficiency of residential water heaters." *Energy Efficiency*, 13(3), 543-556. |
| [10] | Schoenbauer, B. (2021). "Evaluating the performance of tankless water heaters." *Applied Energy*, 285, 116407. |
| [11] | Miller, R., & Park, W. (2019). "The impact of heat pump water heaters on energy efficiency." *Renewable Energy*, 138, 811-819. |
| [12] | Seyam, M., Attia, S., & El-Sayed, S. (2022). "Solar water heating systems for sustainable buildings." *Renewable and Sustainable Energy Reviews*, 138, 110554. |
| [13] | Pal, R., Chowdhury, A., & Biswas, S. (2023). "Hybrid water heaters for energy savings in residential applications." *Energy Reports*, 9, 574-584. |
| [14] | “Heat Capacity & Specific Heat of Water - Formula & Explanation @ BYJU’S.” |
| [15] | “Mini Water Pump Selection Guide MINI WATER PUMP.” |
APA Style
Abubakar, R. A. (2024). Design and Construction of Analog Water Heater Chamber (AWHC) for Sma Rod and Spring Tensile Testing. American Journal of Physics and Applications, 12(3), 62-68. https://doi.org/10.11648/j.ajpa.20241203.12
ACS Style
Abubakar, R. A. Design and Construction of Analog Water Heater Chamber (AWHC) for Sma Rod and Spring Tensile Testing. Am. J. Phys. Appl. 2024, 12(3), 62-68. doi: 10.11648/j.ajpa.20241203.12
AMA Style
Abubakar RA. Design and Construction of Analog Water Heater Chamber (AWHC) for Sma Rod and Spring Tensile Testing. Am J Phys Appl. 2024;12(3):62-68. doi: 10.11648/j.ajpa.20241203.12
Share This Article
Twitter
Linked In
Facebook
Copy
Download@article{10.11648/j.ajpa.20241203.12,
author = {Rabiu Ahmad Abubakar},
title = {Design and Construction of Analog Water Heater Chamber (AWHC) for Sma Rod and Spring Tensile Testing
},
journal = {American Journal of Physics and Applications},
volume = {12},
number = {3},
pages = {62-68},
doi = {10.11648/j.ajpa.20241203.12},
url = {https://doi.org/10.11648/j.ajpa.20241203.12},
eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ajpa.20241203.12},
abstract = {This study details the design and construction of an Analog Water Heater Chamber (AWHC) specifically tailored for tensile testing of Shape Memory Alloy (SMA) rods and springs. The AWHC is designed to simulate various temperature conditions, enabling precise control over the thermo-mechanical behavior of SMA specimens. Energy conversion from the electrical to heat form is achieved using an electrical heating element of 1000 watts. This heat is transferred to the SMA spring/wire using convection using a water medium, and phase transformation occurs. The chamber's unique design allows for real-time monitoring of deformation and recovery processes under controlled temperature and loading conditions. Different test results for both the SMA rod and SMA spring at various loading rates and constant temperature, and continuous loading rate and different temperatures showed a good thermo-mechanical coupling result The AWHC's performance was validated through tensile testing of SMA rods and springs, demonstrating its efficacy in evaluating the mechanical properties and phase transformation temperatures of these materials. The results show excellent correlation with theoretical predictions, confirming the AWHC's suitability for characterizing SMA behavior under diverse thermal and mechanical conditions. This research contributes to the development of efficient testing protocols for SMA components, paving the way for their enhanced integration into various engineering applications, thus the aim of which AWHC is designed for is achieved.
},
year = {2024}
}
TY - JOUR T1 - Design and Construction of Analog Water Heater Chamber (AWHC) for Sma Rod and Spring Tensile Testing AU - Rabiu Ahmad Abubakar Y1 - 2024/11/22 PY - 2024 N1 - https://doi.org/10.11648/j.ajpa.20241203.12 DO - 10.11648/j.ajpa.20241203.12 T2 - American Journal of Physics and Applications JF - American Journal of Physics and Applications JO - American Journal of Physics and Applications SP - 62 EP - 68 PB - Science Publishing Group SN - 2330-4308 UR - https://doi.org/10.11648/j.ajpa.20241203.12 AB - This study details the design and construction of an Analog Water Heater Chamber (AWHC) specifically tailored for tensile testing of Shape Memory Alloy (SMA) rods and springs. The AWHC is designed to simulate various temperature conditions, enabling precise control over the thermo-mechanical behavior of SMA specimens. Energy conversion from the electrical to heat form is achieved using an electrical heating element of 1000 watts. This heat is transferred to the SMA spring/wire using convection using a water medium, and phase transformation occurs. The chamber's unique design allows for real-time monitoring of deformation and recovery processes under controlled temperature and loading conditions. Different test results for both the SMA rod and SMA spring at various loading rates and constant temperature, and continuous loading rate and different temperatures showed a good thermo-mechanical coupling result The AWHC's performance was validated through tensile testing of SMA rods and springs, demonstrating its efficacy in evaluating the mechanical properties and phase transformation temperatures of these materials. The results show excellent correlation with theoretical predictions, confirming the AWHC's suitability for characterizing SMA behavior under diverse thermal and mechanical conditions. This research contributes to the development of efficient testing protocols for SMA components, paving the way for their enhanced integration into various engineering applications, thus the aim of which AWHC is designed for is achieved. VL - 12 IS - 3 ER -
The Institute of Mechanical Design, Department of Mechanical Engineering, Zhejiang University, Hangzhou City, China
Information