A Suit for the Physical Training: Application and the Value of Innovation

Miroslav Dodig

doi:doi:10.11648/j.ajss.20190702.11

| Peer-Reviewed

A Suit for the Physical Training: Application and the Value of Innovation

Miroslav Dodig

Published in American Journal of Sports Science (Volume 7, Issue 2)

Received: 17 March 2019 Accepted: 26 April 2019 Published: 23 May 2019

Views: Downloads:

Download PDF

Share This Article

Twitter
Linked In
Facebook

Abstract

By recognizing the sequential body configuration and time shifts, it is possible to calculate the dynamic moment of inertia. Body, arm, and leg models were proposed in which possible configurations and influential mass distribution sizes were studied. Described is the choice of optimal models for modeling dynamic moments of inertia which are represented as the best approximation for the dynamic moment of inertia in a dynamic sense. Dynamic and physiological parameters (aerobic, aerobic-anaerobic and anaerobic stimuli) are load indexes based on the geometric progression of the metabolic processes (aerobic - index 3, aerobic-anaerobic – index 6 and anaerobic – index 12). For this purpose, the QBASIC program was used to calculate the weight gain for individual segments according to load indexes (index – 3, 6 or 12). A weight gain calculation program for individual segments according to load indexes of male and female bodies was used to calculate the mass, volume and thickness of silicone with and without the addition of lead balls or lead dust. The training process suit represents a three-layer suit where the suit layers are as follows: the first layer (Lycra) which adheres directly to the skin and which must have an elasticity factor that will satisfy the required flexibility and moisture absorption; the second layer (Silicone) the weight of which is proportionately distributed so that the weight of each segment of the second layer corresponding to each individual body segment is equal to the weight gain for that particular body segment; the third layer (Lycra) which is an outer layer and which is watertight but at the same time passes moisture outwards and is elastic. On this basis, a three-layer suit was made with proportionally distributed loads per individual body segments, which ensures proportional load of the segments and the whole body. Thus applied stimuli provide an even impact on the development of the musculoskeletal nervous system in the direction of the development of motor potentials at a high correlation level in the coordination of body motion in the chosen activity. Application, testing and measurement of the suit performance in certain sport movements (walking, running, pedaling, rowing, volleyball and basketball) were carried out using the POLAR measuring instrument and heart beat frequencies depending on intensity of the load were obtained. Based on the information obtained, the Training Process Suit can be used for sports training, recreational activities and for medical purposes when carrying out physical therapy.

Published in	American Journal of Sports Science (Volume 7, Issue 2)
DOI	10.11648/j.ajss.20190702.11
Page(s)	34-52
Creative Commons	This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.
Copyright	Copyright © The Author(s), 2019. Published by Science Publishing Group

Keywords

Suit, Model, Modeling, QBASIC, Display, Application, Training, Results

References

[1]	Božić, Ž., Određivanje dinamičkog momenta inercije kod ravninskog skoka u dalj. Zbornik radova «Skup o konstruiranju» Zagreb. F- II – 1- 9. [Determining the Dinamic Moment of Inertia in Areal Long Jump. Collected Papers “Meeting on Development”], 1988.
[2]	Clauser, C. E., McConville, J. T., and Young, J. W., "Weight, Volume, and Center of Mass of Segments of the Human Body," AMRL Technical Report (TR-69-70). Wright-Patterson Air Force Base, Ohio, 1969.
[3]	CN2865775 (Y) Zhao Huanbin L1 [CN] + Multifunction magnetic therapeutic health weight exercising suit, Publication number: CN2865775 (Y) Publication date: 2007 -02-07. Classification: • international: A61N2/08; A63B 21/065 –
[4]	CN2253225 (Y) Liu Jinxia [CN] + Body-building exercising clothes, Publication number: Publicat;on date: 1997 -04-30: Application number: CN19952003075U 19950224 Priority number(s): CN19952003075U 19950224 A63821/065; (IPC 1-7): A63821/065
[5]	CN1252316 (A) Zhou Mingliang [CN] + Gravitational training suit, Publication date: 2000-05-10 Classification: - international: A63B21/065; (IPC1-?): A63B21/065 • European: Application number: CN19991 025095 1999 1126 priority number(s): CN19991025095 1999 1126
[6]	De Leva, P., ‘‘Adjustments to Zatsiorsky-Seluyanov’s segment inertia parameters,’’ Journal of Biomechanics, Vol. 29, No. 9, pp. 1223–1230, 1996.
[7]	Dodig, M., Biomehanika čovječjeg tijela [Biomechanics of the Human Body] Rijeka: University of Rijeka, 1994.
[8]	Dodig, M., Razvoj tjelesnih sposobnosti čovječjeg organizma, Sveučilište u Rijeci. [The Development of Physical Abilities of the Human Organism] University of Rijeka, 1998.
[9]	Dodig, M., Modeli i modeliranje tjelovježbenih procesa [Model and Modelling Physical Training Process]. Rijeka: University of Rijeka, 2002.
[10]	Dodig, M., Pliometrijski mišićni trening, Sveučilište u Rijeci, [Plyometric muscle training] University of Rijeka, 2002.
[11]	Dodig, M., Mehanizmi regulacije gibanja čovječjeg tijela – osnove kineziologije [Mechanisms Regulate Motion Human of Body – Basis Kinesiology] University of Rijeka, 2008.
[12]	Dodig, M., Relations between Anthropometric Dimensions and Overcome Resistance in Individual Motion. Global Journal of Science Frontier Research (0975-5896) 14, E-2; 27-32, 2014.
[13]	Dodig, M., Relations Between Anthropometric Dimensions and Overcome Resistance in Recurring Motion. American Journal of Educational Research (2327-6126) 2, 6; 393-396, 2014.
[14]	Dodig,' M.' (2015).' Canonical' Relations' of' Sensorimotor' Reactions' of' Multilateral' and' Bilateral' Body' Parts.) Advances) in) Social) Sciences)Research)Journal,)2(5))105B114' Copyright!©!Society!for!Science!and!Education,!United!Kingdom 105
[15]	Dodig, M., Models and Modelling of Dynamic Moments of Inertia of Human Body International Journal of Sports Science 2016, 6(6): 249-256
[16]	Dodig, M., Odijelo za trenažni proces, A Suit for the Physical Hysical Training Process, Državni zavod za intelektualno vlasništvo RH. Konsenzualni patent Zagreb, 18. 09. 2015.
[17]	Dodig, M., Senzomotoričke reakcije čovječjeg tijela – osnove kineziologije I. [Sensomotor Reactions of the Human Body - The Basis of Kinesiology I.] University of Rijeka, PARADOX, d.o.o..Rijeka, 2019.
[18]	Donskij, D. D, Zatsiorsky, V. M., Biomehanika. Fiskultura i sport, Moskva. [Biomechanics] Physical training and sports, Moscow, 1979.
[19]	Hanavan, E. P., ‘‘A Mathematical Model of the Human Body,’’ Technical Report, Aerospace Medical Research Lab., Wright-Patterson Air Force Base, OH., 158 pages, 1964.
[20]	Hinrichs, R. N., "Adjustments to the Center of Mass Proportions of Clauser et al. (1969)," Journal of Biomechanics. Vol. 23, No. 9, pp. 949-951, 1990.
[21]	Kaleps, O., Clauser, C. E. et al., Investigation into mass distribution properties of the human body and its segments, Ergonomics 27, No 12, 1225-1237., 1984.
[22]	Korenev G. B., Wedenie v mehaniku čeloveka, Moskva, Nauka [Introduction čeloveka mechanics] Moscow, Science, 1977.
[23]	Muftić, O., Krajina, B., Značaj dinamičke antropometrije u proučavanju sportskih pokreta. Zbornik radova «Skup o konstruiranju», Zagreb. Ergonomija IX 1-9, [Significance of Dynamic Anthropometry in Studying Sports Moves. Collected Papers “Meeting on Development”], 1988.
[24]	Radoš, N., Pojednostavljeni dinamički model čovjeka korišten za procjenu traumatskih ozljeda u slabinskom području. Zbornik radova «Skup o konstruiranju», Zagreb, E – XIV – 1-7. [Simplified Dynamic Model of Man Used for Evaluation of Traumatic Injuries in Flank Area. Collected Papers “Meeting on Development”], 1988.
[25]	Rudan, P., Dimenzije tijela i tjelesni položaji pri radu, Medicina rada, Sarajevo, 87-92. [Dimensions of Body and Physical Positions While Working], 1978.
[26]	US5937441 (A), Raines Mark T [US] + Weighted exercise and therapeutic suit, US5937441 (A), 1999-08-17, - international: A63B21/065; (IPC1-7): A41D13/00 European: A63B21/065 Application number: US1996069242 819960805 Priority number(s): US19960692428 19960805; US19940281490 1 9940727
[27]	US2010319099 (A1), Washington JR Gordon [US]; Fitness & Training Weight Suite, 2010-12-23, A41D1/00; A63B 21/065 - European: A41D13/00R Application number: US200904B7B5 320090619 Priority number{s): US200904B7B53 20090619
[28]	US005659898A Bell, Jr. Charles Bell, Jr., Exercise Sut Having Flexble Elongated Weights Between Elastic Fabrc Layers Inventor: 3512-A SouthridgeDr., Austin, Tex. 78704 Appl. No.: 324,625 Filed: Oct. 18, 1994.
[29]	US2004221355 (A1) Garcia Fernando L [US] + piece full body weighted swimsuit,:ationnumber::ation date: 2004-11-11.
[30]	US57687O6, Charles L. Griffith; Antoinette Bacchus Griffith, Midi Weighted Jacket, both of 4316 Saugus Dr., Grand Prairie, Tex. 75052, 11 Patent Number: 5,768,706 (45) Date of Patent: Jun. 23, 1998
[31]	Zatsiorsky, V. M., Seluyanov, V. N. and Chugunova, L. G., ‘‘Methods of determining massinertial characteristics of human body segments,’’ In Contemporary Problems of Biomechanics, (Ed. Chemyi, G. G. and Regirer, S. A.), CRC Press, MA, pp. 272–291, 1990
[32]	W09909846 (A 1) Wilkison William T [US] + Energy Expenditure/Training Garment, Publication number Publication date: 1999-03-04 Inventor(s):+ Classification: Also published as: I US5867826 (A) AU8779698 (A) EP1017291 (A1) EP1017291 (M) "JP2001513581 (T) international: A41D13/00; A63B21/055; (IPC1-7); A41D13/0-
[33]	W00226330 (A 1) Cavallera Pier Giorgio [IT] + Sports Garment For Training, Publication date: 2002-04-04 Classification: -International: A63B21/008; A63B21/055; A63B21/065; (IPC1-7): A63B21/008; A63B21/055; A63B21/065 - European: A63B21/008B4; A63B21/055; A63B21/055D; A63B21/065 Application number: W020001 T00495 20001130 Priority number(s): W020001T00377 20000926
[34]	WO2002026330A1, Pier Giorgio Cavallera, Sports garment for training, Priority date, Family: WO (1) Date App/Pub Number Status 2000-11-30 PCT/IT2000/000495 2002-04-04 WO2002026330A1 Application

Cite This Article

Plain Text BibTeX RIS

APA Style

Miroslav Dodig. (2019). A Suit for the Physical Training: Application and the Value of Innovation. American Journal of Sports Science, 7(2), 34-52. https://doi.org/10.11648/j.ajss.20190702.11

Copy | Download

ACS Style

Miroslav Dodig. A Suit for the Physical Training: Application and the Value of Innovation. Am. J. Sports Sci. 2019, 7(2), 34-52. doi: 10.11648/j.ajss.20190702.11

Copy | Download

AMA Style

Miroslav Dodig. A Suit for the Physical Training: Application and the Value of Innovation. Am J Sports Sci. 2019;7(2):34-52. doi: 10.11648/j.ajss.20190702.11

Copy | Download

@article{10.11648/j.ajss.20190702.11,
  author = {Miroslav Dodig},
  title = {A Suit for the Physical Training: Application and the Value of Innovation},
  journal = {American Journal of Sports Science},
  volume = {7},
  number = {2},
  pages = {34-52},
  doi = {10.11648/j.ajss.20190702.11},
  url = {https://doi.org/10.11648/j.ajss.20190702.11},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ajss.20190702.11},
  abstract = {By recognizing the sequential body configuration and time shifts, it is possible to calculate the dynamic moment of inertia. Body, arm, and leg models were proposed in which possible configurations and influential mass distribution sizes were studied. Described is the choice of optimal models for modeling dynamic moments of inertia which are represented as the best approximation for the dynamic moment of inertia in a dynamic sense. Dynamic and physiological parameters (aerobic, aerobic-anaerobic and anaerobic stimuli) are load indexes based on the geometric progression of the metabolic processes (aerobic - index 3, aerobic-anaerobic – index 6 and anaerobic – index 12). For this purpose, the QBASIC program was used to calculate the weight gain for individual segments according to load indexes (index – 3, 6 or 12). A weight gain calculation program for individual segments according to load indexes of male and female bodies was used to calculate the mass, volume and thickness of silicone with and without the addition of lead balls or lead dust. The training process suit represents a three-layer suit where the suit layers are as follows: the first layer (Lycra) which adheres directly to the skin and which must have an elasticity factor that will satisfy the required flexibility and moisture absorption; the second layer (Silicone) the weight of which is proportionately distributed so that the weight of each segment of the second layer corresponding to each individual body segment is equal to the weight gain for that particular body segment; the third layer (Lycra) which is an outer layer and which is watertight but at the same time passes moisture outwards and is elastic. On this basis, a three-layer suit was made with proportionally distributed loads per individual body segments, which ensures proportional load of the segments and the whole body. Thus applied stimuli provide an even impact on the development of the musculoskeletal nervous system in the direction of the development of motor potentials at a high correlation level in the coordination of body motion in the chosen activity. Application, testing and measurement of the suit performance in certain sport movements (walking, running, pedaling, rowing, volleyball and basketball) were carried out using the POLAR measuring instrument and heart beat frequencies depending on intensity of the load were obtained. Based on the information obtained, the Training Process Suit can be used for sports training, recreational activities and for medical purposes when carrying out physical therapy.},
 year = {2019}
}

Copy | Download

TY  - JOUR
T1  - A Suit for the Physical Training: Application and the Value of Innovation
AU  - Miroslav Dodig
Y1  - 2019/05/23
PY  - 2019
N1  - https://doi.org/10.11648/j.ajss.20190702.11
DO  - 10.11648/j.ajss.20190702.11
T2  - American Journal of Sports Science
JF  - American Journal of Sports Science
JO  - American Journal of Sports Science
SP  - 34
EP  - 52
PB  - Science Publishing Group
SN  - 2330-8540
UR  - https://doi.org/10.11648/j.ajss.20190702.11
AB  - By recognizing the sequential body configuration and time shifts, it is possible to calculate the dynamic moment of inertia. Body, arm, and leg models were proposed in which possible configurations and influential mass distribution sizes were studied. Described is the choice of optimal models for modeling dynamic moments of inertia which are represented as the best approximation for the dynamic moment of inertia in a dynamic sense. Dynamic and physiological parameters (aerobic, aerobic-anaerobic and anaerobic stimuli) are load indexes based on the geometric progression of the metabolic processes (aerobic - index 3, aerobic-anaerobic – index 6 and anaerobic – index 12). For this purpose, the QBASIC program was used to calculate the weight gain for individual segments according to load indexes (index – 3, 6 or 12). A weight gain calculation program for individual segments according to load indexes of male and female bodies was used to calculate the mass, volume and thickness of silicone with and without the addition of lead balls or lead dust. The training process suit represents a three-layer suit where the suit layers are as follows: the first layer (Lycra) which adheres directly to the skin and which must have an elasticity factor that will satisfy the required flexibility and moisture absorption; the second layer (Silicone) the weight of which is proportionately distributed so that the weight of each segment of the second layer corresponding to each individual body segment is equal to the weight gain for that particular body segment; the third layer (Lycra) which is an outer layer and which is watertight but at the same time passes moisture outwards and is elastic. On this basis, a three-layer suit was made with proportionally distributed loads per individual body segments, which ensures proportional load of the segments and the whole body. Thus applied stimuli provide an even impact on the development of the musculoskeletal nervous system in the direction of the development of motor potentials at a high correlation level in the coordination of body motion in the chosen activity. Application, testing and measurement of the suit performance in certain sport movements (walking, running, pedaling, rowing, volleyball and basketball) were carried out using the POLAR measuring instrument and heart beat frequencies depending on intensity of the load were obtained. Based on the information obtained, the Training Process Suit can be used for sports training, recreational activities and for medical purposes when carrying out physical therapy.
VL  - 7
IS  - 2
ER  -

Copy | Download

Author Information

Miroslav Dodig

University of Rijeka, Rijeka, Croatia

Download PDF

Sections

Plain Text BibTeX RIS

APA Style

Miroslav Dodig. (2019). A Suit for the Physical Training: Application and the Value of Innovation. American Journal of Sports Science, 7(2), 34-52. https://doi.org/10.11648/j.ajss.20190702.11

Copy | Download

ACS Style

Miroslav Dodig. A Suit for the Physical Training: Application and the Value of Innovation. Am. J. Sports Sci. 2019, 7(2), 34-52. doi: 10.11648/j.ajss.20190702.11

Copy | Download

AMA Style

Miroslav Dodig. A Suit for the Physical Training: Application and the Value of Innovation. Am J Sports Sci. 2019;7(2):34-52. doi: 10.11648/j.ajss.20190702.11

Copy | Download

@article{10.11648/j.ajss.20190702.11,
  author = {Miroslav Dodig},
  title = {A Suit for the Physical Training: Application and the Value of Innovation},
  journal = {American Journal of Sports Science},
  volume = {7},
  number = {2},
  pages = {34-52},
  doi = {10.11648/j.ajss.20190702.11},
  url = {https://doi.org/10.11648/j.ajss.20190702.11},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ajss.20190702.11},
  abstract = {By recognizing the sequential body configuration and time shifts, it is possible to calculate the dynamic moment of inertia. Body, arm, and leg models were proposed in which possible configurations and influential mass distribution sizes were studied. Described is the choice of optimal models for modeling dynamic moments of inertia which are represented as the best approximation for the dynamic moment of inertia in a dynamic sense. Dynamic and physiological parameters (aerobic, aerobic-anaerobic and anaerobic stimuli) are load indexes based on the geometric progression of the metabolic processes (aerobic - index 3, aerobic-anaerobic – index 6 and anaerobic – index 12). For this purpose, the QBASIC program was used to calculate the weight gain for individual segments according to load indexes (index – 3, 6 or 12). A weight gain calculation program for individual segments according to load indexes of male and female bodies was used to calculate the mass, volume and thickness of silicone with and without the addition of lead balls or lead dust. The training process suit represents a three-layer suit where the suit layers are as follows: the first layer (Lycra) which adheres directly to the skin and which must have an elasticity factor that will satisfy the required flexibility and moisture absorption; the second layer (Silicone) the weight of which is proportionately distributed so that the weight of each segment of the second layer corresponding to each individual body segment is equal to the weight gain for that particular body segment; the third layer (Lycra) which is an outer layer and which is watertight but at the same time passes moisture outwards and is elastic. On this basis, a three-layer suit was made with proportionally distributed loads per individual body segments, which ensures proportional load of the segments and the whole body. Thus applied stimuli provide an even impact on the development of the musculoskeletal nervous system in the direction of the development of motor potentials at a high correlation level in the coordination of body motion in the chosen activity. Application, testing and measurement of the suit performance in certain sport movements (walking, running, pedaling, rowing, volleyball and basketball) were carried out using the POLAR measuring instrument and heart beat frequencies depending on intensity of the load were obtained. Based on the information obtained, the Training Process Suit can be used for sports training, recreational activities and for medical purposes when carrying out physical therapy.},
 year = {2019}
}

Copy | Download

TY  - JOUR
T1  - A Suit for the Physical Training: Application and the Value of Innovation
AU  - Miroslav Dodig
Y1  - 2019/05/23
PY  - 2019
N1  - https://doi.org/10.11648/j.ajss.20190702.11
DO  - 10.11648/j.ajss.20190702.11
T2  - American Journal of Sports Science
JF  - American Journal of Sports Science
JO  - American Journal of Sports Science
SP  - 34
EP  - 52
PB  - Science Publishing Group
SN  - 2330-8540
UR  - https://doi.org/10.11648/j.ajss.20190702.11
AB  - By recognizing the sequential body configuration and time shifts, it is possible to calculate the dynamic moment of inertia. Body, arm, and leg models were proposed in which possible configurations and influential mass distribution sizes were studied. Described is the choice of optimal models for modeling dynamic moments of inertia which are represented as the best approximation for the dynamic moment of inertia in a dynamic sense. Dynamic and physiological parameters (aerobic, aerobic-anaerobic and anaerobic stimuli) are load indexes based on the geometric progression of the metabolic processes (aerobic - index 3, aerobic-anaerobic – index 6 and anaerobic – index 12). For this purpose, the QBASIC program was used to calculate the weight gain for individual segments according to load indexes (index – 3, 6 or 12). A weight gain calculation program for individual segments according to load indexes of male and female bodies was used to calculate the mass, volume and thickness of silicone with and without the addition of lead balls or lead dust. The training process suit represents a three-layer suit where the suit layers are as follows: the first layer (Lycra) which adheres directly to the skin and which must have an elasticity factor that will satisfy the required flexibility and moisture absorption; the second layer (Silicone) the weight of which is proportionately distributed so that the weight of each segment of the second layer corresponding to each individual body segment is equal to the weight gain for that particular body segment; the third layer (Lycra) which is an outer layer and which is watertight but at the same time passes moisture outwards and is elastic. On this basis, a three-layer suit was made with proportionally distributed loads per individual body segments, which ensures proportional load of the segments and the whole body. Thus applied stimuli provide an even impact on the development of the musculoskeletal nervous system in the direction of the development of motor potentials at a high correlation level in the coordination of body motion in the chosen activity. Application, testing and measurement of the suit performance in certain sport movements (walking, running, pedaling, rowing, volleyball and basketball) were carried out using the POLAR measuring instrument and heart beat frequencies depending on intensity of the load were obtained. Based on the information obtained, the Training Process Suit can be used for sports training, recreational activities and for medical purposes when carrying out physical therapy.
VL  - 7
IS  - 2
ER  -

Copy | Download