Research has proposed various ways to develop ballistic/explosive arm rotational movements for throwers but demonstrated inherent limitations for the lack of traditional resistance training respecting sport-specific tasks. A prototype device was conceived for ballistic multi-joint throwing exercises. Forty-three high-level competitive U19 male handball players participated in the study aged 18.42 ± 1.17 years; 82.36 ± 3.07 mass kg; and 184.91 ± 6.06 m height. Subjects underwent tests on the ASSSD, which operates into consecutive accelerative and decelerative actions, for throwing characteristics determination. Concentric (CON) and eccentric (ECC) variables during overhead throws as force, power, velocity, acceleration and angle when occurred peak force (PF), power (PP) and velocity (PV) were defined. The relative reliability was calculated using the intraclass correlation coefficients (ICCs) showing strong agreement between trials. The absolute reliability was analyzed using standard error of measurement SEM (0.03-2.75), and Coefficients of variation CVs (2.84-4.59%) for studied variables, reveals excellent interday reliability. Validity was assessed using linear regressions, r and p values showing good relationship between PF and PP gathered from ASSSD and isokinetic peak torques at different angular velocities of dominant arm (DA). The device sensitivity was verified when assessing CON-ECC PF, CON-ECC PP and CON PV with elite/non-elite players. The ASSSD has demonstrated its reliability, validity and sensitivity intended for testing, training monitoring and sport performance assessment.
Published in | American Journal of Sports Science (Volume 8, Issue 1) |
DOI | 10.11648/j.ajss.20200801.11 |
Page(s) | 1-9 |
Creative Commons |
This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited. |
Copyright |
Copyright © The Author(s), 2020. Published by Science Publishing Group |
Ballistic, Concentric, Eccentric, Multi-joints Motion, Throwing Device
[1] | James, L., G. Gregory Haff, V. G. Kelly, M. J. Connick, B. W. Hoffman, and E. M. Beckman. “The impact of strength level on adaptations to combined weightlifting, plyometric, and ballistic training”. Scand J Med Sci Sports. 28 (5), 2018, pp. 1494-1505. doi: 10.1111/sms.13045. |
[2] | Baker, D., S. Nance, and M. Moore, “The load that maximizes the average mechanical power output during explosive bench press throws in highly trained athletes”. J Strength Cond. Res I5 (l), 2001, pp. 20-24. doi: 10.1519/1533-4287 (2005) 19<202: AEOPOO>2.0. CO; 2. |
[3] | Moir, G. L., S. N. Munford, L. L. Moroski, S. E. Davis, The Effects of Ballistic and Nonballistic Bench Press on Mechanical Variables. J Strength Cond Res. 32 (12), 2018 pp. 3333-3339. doi: 10.1519/JSC.0000000000001835. |
[4] | Roach, N. T., and D. E. Lieberman, “Upper body contributions to power generation during rapid, overhand throwing in human”. J Exp Biol 217, 2014, pp. 2139-49. doi: 10.1242/jeb.103275 |
[5] | Wilson, G. J., R. U. Newton, A. J. Murphy, and B. J. Humphries, “The optimal training load for the development of dynamic athletic performance”. Med Sci Sports Exerc 25 (11), 1993, pp. 1279-86. doi: 10.1249/00005768-199311000-00013 |
[6] | Cronin, J., and G. Sleivert, “Challenges in understanding the influence of maximal power training on improving athletic performance”. Sports Med (35), 2005, pp. 213–234. https://doi.org/10.2165/00007256-200535030-00003. |
[7] | Cormie, P., J. M. McBride, and G. O. McCaulley, “Power-time, force-time, and velocity-time curve analysis of the countermovement jump: impact of training”. J Strength Cond Res 23 (1), 2009, pp. 177-86. doi: 10.1519/JSC.0b013e3181889324. |
[8] | Bevan, H. R., P. J. Bunce, N. J. Owen, M. A. Bennett, C. J. Cook, D. J. Cunningham, R. U. Newton, and L. P. Kilduff, “Optimal loading for the development of peak power output in professional rugby players”. J Strength Cond Res 24 (1), 2010 pp. 43-7. doi: 10.1519/JSC.0b013e3181c63c64. |
[9] | Courel-Ibáñez, J., A. Martínez-Cava, R. Morán-Navarro, P. Escribano-Peñas, J. Chavarren-Cabrero, J. J. González-Badillo, and J. G. Pallarés, “Reproducibility and Repeatability of Five Different Technologies for Bar Velocity Measurement in Resistance Training”. Annals of Biomedical Engineering 47, 2019, pp. 1523–1538. https://doi.org/10.1007/s10439-019-02265-6. |
[10] | García-Ramos, A., G. G. Haff, P. Jiménez-Reyes, A. Pérez-Castilla, “Assessment of Upper-Body Ballistic Performance Through the Bench Press Throw Exercise: Which Velocity Outcome Provides the Highest Reliability?” J Strength Cond Res. 32 (10), 2018, pp. 2701-2707. doi: 10.1519/JSC.0000000000002616. |
[11] | Stone, M. H., S. Plisk, and D. Collins, “Training principles: Evaluation of modes and methods of resistance training”. Strength Cond. J 22 (3), 2000, pp. 65–76. doi: 10.1519/1533- 4295 (2000) 022<0065: TPEOMA>2.0.CO; 2. |
[12] | Cronin, J., P. J. McNair, and R. N. Marshall, “Velocity specificity, combination training and sport specific tasks”. J Sci Med Sport 4 (2), 2001, pp. 168-178. https://doi.org/10.1016/S1440-2440 (01) 80027-X. |
[13] | Noffal, G. J., “Isokinetic eccentric-to-concentric strength ratios of the shoulder rotator muscles in throwers and nonthrowers”. Am J Sports Med 31 (4), 2003, pp. 537–541. doi: 10.1177/03635465030310041001. |
[14] | Sakamoto, A., P. J. Sinclair, and H. Naito, “Strategies for maximizing power and strength gains in isoinertial resistance training: Implications for competitive athletes”. J Phys Fitness Sports Med 5 (2), 2016, pp. 153-166. https://doi.org/10.7600/jpfsm.5.153. |
[15] | Marsh J. A., M. I. Wagshol, K. J. Boddy, M. E. O’Connell, S. J. Brined, K. E. Lindley, and A. Caravan, “Effects of a six-week weighted-implement throwing program on baseball pitching velocity, kinematics, arm stress, and arm range of motion”. PeerJ. (6), 2018, pp. 1-27. doi: 10.7717/peerj.6003. |
[16] | Van den Tillaar, R., and G. Ettema, “A comparison of kinematics between overarm throwing with 20% underweight, regular, and 20% overweight balls”. J Appl Biomech 27 (3), 2011, pp. 252-7. doi: 10.1123/jab.27.3.252. |
[17] | Colado, J. C., X. García-Massó, M. Pellicer, and R. Cabeza-Ruiz, “A Comparison of Elastic Tubing and Isotonic Resistance Exercises”. Int J Sports Med 31 (11), 2010, pp. 810-7. doi: 10.1055/s-0030-1262808. |
[18] | Kaczmarek, P. K., P. Lubiatowski, P. Cisowski, M. Grygorowicz, M. Łepski, J. Długosz, P. Ogrodowicz, W. Dudziński, M. Nowak, and L. Romanowski, “Shoulder problems in overhead sports. Part I – biomechanics of throwing”. Pol Orthop Traumatol 79, 2014, pp. 50-58. PMID: 24941418. |
[19] | Wagner, H., J. Pfusterschmied, S. P. von Duvillard, and E. Müller, “Performance and Kinematics of Various Throwing Techniques in Team-Handball”. J Sports Sci Med 10 (1), 2011, pp. 73–80. PMID: 24149298 |
[20] | Mascarin, N. C., C. A. Barbosade Lira, R. LuizVancini, A. Carlosda Silva, and M. S. Andrade, “The effects of preventive rubber band training on shoulder joint imbalance and throwing performance in handball players: A randomized and prospective study”. Journal of Bodywork and Movement Therapies Volume 21, Issue 4, 2017, pp. 1017-1023. https://doi.org/10.1016/j.jbmt.2017.01.003. |
[21] | Cormie, P., M. R. McGuigan, and R. U. Newton, “Developing maximal neuromuscular power: part 2-training considerations for improving maximal power production”. Sports Med 41, 2011, pp. 125–146. https://doi.org/10.2165/11538500-000000000-00000. |
[22] | Bland, J. M., and D. G. Altman, “A note on the use of the intraclass correlation coefficient in the evaluation of agreement between 2 methods of measurement”. Comput. Biol. Med 20, 1990, pp. 337-340. https://doi.org/10.1016/0010-4825 (90) 90013-F. |
[23] | Bartko, J. J., “The intraclass correlation coefficient as a measure of reliability”. Psychol Rep 19, 1966, pp. 3-11. https://doi.org/10.2466/pr0.1966.19.1.3. |
[24] | Hopkins, W. G., “Measures of reliability in sports medicine and science”. Sports Med 30, 2000, pp. 1–15. doi: 10.2165/00007256-200030010-00001. |
[25] | Baker, D., and R. U. Newton, “Acute effect on power output of alternating an agonist and antagonist muscle exercise during complex training”. J Strength Cond Res 19 (1), 2005, pp. 202-5. doi: 10.1519/00124278-200102000-00004. |
[26] | Kawamori, N., and G. G. Haff, “The optimal training load for the development of muscular power”. J Strength Cond Res 18 (3), 2004, pp. 675–684. doi: 10.1519/1533-4287 (2004) 18<675: TOTLFT>2.0.CO; 2. |
[27] | Macías-Hernández, S. I., and L. E. Pérez-Ramírez, “Eccentric strength training for the rotator cuff tendinopathies with subacromial impingement”. Current. Cir Cir 83 (1), 2015, pp. 74-80. doi: 10.1016/j.circir.2015.04.029. |
[28] | Ojasto, T., and K. Hakkinen, “Effects of different accentuated eccentric load levels in eccentric-concentric actions on acute neuromuscular, maximal force, and power responses”. J Strength Cond Res 23, 2009, pp. 996-1004. doi: 10.1519/JSC.0b013e3181a2b28e. |
[29] | Reeves, N. D., C. N. Maganaris, S. Longo, and M. V. Narici, “Differential adaptations to eccentric versus conventional resistance training in older humans”. Exp. Physiol 94, 2009, pp. 825–833. https://doi.org/10.1113/expphysiol.2009.046599. |
[30] | Cormie, P., M. R. McGuigan, and R. U. Newton, “Adaptations in athletic performance after ballistic power versus strength training”. Med Sci Sports Exerc 42 (8), 2010, pp. 1582-98. doi: 10.1249/MSS.0b013e3181d2013a. |
[31] | Naito K., T. Takagi, H. Kubota, T. Maruyama, “Relationships between ball velocity and throwing mechanics in collegiate baseball pitchers”. Journal of Sports Engineering and Technology 233 (4), 2019, pp. 489-502. https://doi.org/10.1177/1754337119852458. |
[32] | Szymanski, D. J., C. DeRenne, and F. J. Spaniol, “Contributing factors for increased bat swing velocity: A brief review”. J Strength Cond Res 23 (4), 2009, pp. 1338-52. doi 10.1519/JSC.0b013e318194e09c. |
[33] | Jidovtseff, B., “Development of a specific dynamometer of muscular power”. University of Liège (Belgium), Department of Sport and Rehabilitation Sciences. [Doctoral thesis]. 2006, pp. 259 [in French]. |
[34] | van Cingel R., B. Habets, L., Willemsen, and B. Staal. “Shoulder Dynamic Control Ratio and Rotation Range of Motion in Female Junior Elite Handball Players and Controls”. Clin J Sport Med. 28 (2), 2018, pp. 153-158. doi: 10.1097/JSM.0000000000000429. |
[35] | Hellem, A., S. Matthew, N. Schilaty and D. Diane, “Review of Shoulder Range of Motion in the Throwing Athlete: Distinguishing Normal Adaptations from Pathologic Deficits”. Current Reviews in Musculoskeletal Medicine 12, 2019, pp. 346–355. https://doi.org/10.1007/s12178-019-09563-5 |
[36] | Mugele, H., A. Plummer, K. Steffen, J. Stoll, F. Mayer, and J. Müller, “General versus sports-specific injury prevention programs in athletes: A systematic review on the effect on injury rates”. PLoS One. 19; 13 (10), 2018, pp. 1-16. doi: 10.1371/journal.pone.0205635. eCollection 2018. |
[37] | Barstow, I. K., M. D. Bishop, and T. W. Kaminski, “Is enhanced-eccentric resistance training superior to traditional training for increasing elbow flexor strength?”. J Sports Sci Med 2 (2), 2003, pp. 62-9. PMID: 24616612. |
[38] | Friedmann, B., R. Kinscherf, S. Vorwald, H. Müller, K. Kucera, S. Borisch, G. Richter, P. Bärtsch, and R. Billeter, “Muscular adaptations to computer-guided strength training with eccentric overload”. Acta Physiol Scand 182 (1), 2004, pp. 77-88. https://doi.org/10.1111/j.1365-201X.2004.01337.x. |
[39] | Bernhardsson, S., I. H. Klintberg, and G. K. Wendt, “Evaluation of an exercise concept focusing on eccentric strength training of the rotator cuff for patients with subacromial impingement syndrome”. Clin Rehabil 25 (1), 2011, pp. 69-78. https://doi.org/10.1177/0269215510376005. |
[40] | Muratori, L. M., E. M. Lamberg, L. Quinn, and S. V. Duff, “Applying principles of motor learning and control to upper extremity rehabilitation”. J Hand Ther 26 (2), 2013, pp. 94–103. doi: 10.1016/j.jht.2012.12.007. |
APA Style
Brahim Agrebi, Rachid Bouagina, Akram Fray, Hatem Abidi, Fethi Guemira, et al. (2020). Arm/Shoulder Specific Strength Device for Throwers. American Journal of Sports Science, 8(1), 1-9. https://doi.org/10.11648/j.ajss.20200801.11
ACS Style
Brahim Agrebi; Rachid Bouagina; Akram Fray; Hatem Abidi; Fethi Guemira, et al. Arm/Shoulder Specific Strength Device for Throwers. Am. J. Sports Sci. 2020, 8(1), 1-9. doi: 10.11648/j.ajss.20200801.11
AMA Style
Brahim Agrebi, Rachid Bouagina, Akram Fray, Hatem Abidi, Fethi Guemira, et al. Arm/Shoulder Specific Strength Device for Throwers. Am J Sports Sci. 2020;8(1):1-9. doi: 10.11648/j.ajss.20200801.11
@article{10.11648/j.ajss.20200801.11, author = {Brahim Agrebi and Rachid Bouagina and Akram Fray and Hatem Abidi and Fethi Guemira and Mounir Bezzarga and Nooman Guelmami and Narjes Houas and Sofien Kasmi and Oussama Ben Mohamed and Riadh Khalifa}, title = {Arm/Shoulder Specific Strength Device for Throwers}, journal = {American Journal of Sports Science}, volume = {8}, number = {1}, pages = {1-9}, doi = {10.11648/j.ajss.20200801.11}, url = {https://doi.org/10.11648/j.ajss.20200801.11}, eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ajss.20200801.11}, abstract = {Research has proposed various ways to develop ballistic/explosive arm rotational movements for throwers but demonstrated inherent limitations for the lack of traditional resistance training respecting sport-specific tasks. A prototype device was conceived for ballistic multi-joint throwing exercises. Forty-three high-level competitive U19 male handball players participated in the study aged 18.42 ± 1.17 years; 82.36 ± 3.07 mass kg; and 184.91 ± 6.06 m height. Subjects underwent tests on the ASSSD, which operates into consecutive accelerative and decelerative actions, for throwing characteristics determination. Concentric (CON) and eccentric (ECC) variables during overhead throws as force, power, velocity, acceleration and angle when occurred peak force (PF), power (PP) and velocity (PV) were defined. The relative reliability was calculated using the intraclass correlation coefficients (ICCs) showing strong agreement between trials. The absolute reliability was analyzed using standard error of measurement SEM (0.03-2.75), and Coefficients of variation CVs (2.84-4.59%) for studied variables, reveals excellent interday reliability. Validity was assessed using linear regressions, r and p values showing good relationship between PF and PP gathered from ASSSD and isokinetic peak torques at different angular velocities of dominant arm (DA). The device sensitivity was verified when assessing CON-ECC PF, CON-ECC PP and CON PV with elite/non-elite players. The ASSSD has demonstrated its reliability, validity and sensitivity intended for testing, training monitoring and sport performance assessment.}, year = {2020} }
TY - JOUR T1 - Arm/Shoulder Specific Strength Device for Throwers AU - Brahim Agrebi AU - Rachid Bouagina AU - Akram Fray AU - Hatem Abidi AU - Fethi Guemira AU - Mounir Bezzarga AU - Nooman Guelmami AU - Narjes Houas AU - Sofien Kasmi AU - Oussama Ben Mohamed AU - Riadh Khalifa Y1 - 2020/02/04 PY - 2020 N1 - https://doi.org/10.11648/j.ajss.20200801.11 DO - 10.11648/j.ajss.20200801.11 T2 - American Journal of Sports Science JF - American Journal of Sports Science JO - American Journal of Sports Science SP - 1 EP - 9 PB - Science Publishing Group SN - 2330-8540 UR - https://doi.org/10.11648/j.ajss.20200801.11 AB - Research has proposed various ways to develop ballistic/explosive arm rotational movements for throwers but demonstrated inherent limitations for the lack of traditional resistance training respecting sport-specific tasks. A prototype device was conceived for ballistic multi-joint throwing exercises. Forty-three high-level competitive U19 male handball players participated in the study aged 18.42 ± 1.17 years; 82.36 ± 3.07 mass kg; and 184.91 ± 6.06 m height. Subjects underwent tests on the ASSSD, which operates into consecutive accelerative and decelerative actions, for throwing characteristics determination. Concentric (CON) and eccentric (ECC) variables during overhead throws as force, power, velocity, acceleration and angle when occurred peak force (PF), power (PP) and velocity (PV) were defined. The relative reliability was calculated using the intraclass correlation coefficients (ICCs) showing strong agreement between trials. The absolute reliability was analyzed using standard error of measurement SEM (0.03-2.75), and Coefficients of variation CVs (2.84-4.59%) for studied variables, reveals excellent interday reliability. Validity was assessed using linear regressions, r and p values showing good relationship between PF and PP gathered from ASSSD and isokinetic peak torques at different angular velocities of dominant arm (DA). The device sensitivity was verified when assessing CON-ECC PF, CON-ECC PP and CON PV with elite/non-elite players. The ASSSD has demonstrated its reliability, validity and sensitivity intended for testing, training monitoring and sport performance assessment. VL - 8 IS - 1 ER -