| Peer-Reviewed

Wedging Angle Effect on the Aerodynamic Structure of a Rutland 913 Horizontal Axis Wind Turbine

Received: 12 April 2016     Accepted: 18 April 2016     Published: 5 July 2016
Views:       Downloads:
Abstract

Numerical simulation was achieved to study the aerodynamic characteristics around horizontal axis wind turbine of Rutland 913 type. Our study has been focus on the wedging angle effect. From application of the commercial computational fluid dynamics code "Fluent", the distribution of the velocity fields and static pressure was presented in different planes of the considered control volume. These results present the local characteristics of the turbulent flow and give us informations about the wind turbine performance. Indeed, the geometrical parameters have been compared to choose the optimal conditions of the wind turbine.

Published in International Journal of Fluid Mechanics & Thermal Sciences (Volume 2, Issue 1)
DOI 10.11648/j.ijfmts.20160201.11
Page(s) 1-9
Creative Commons

This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.

Copyright

Copyright © The Author(s), 2016. Published by Science Publishing Group

Keywords

CFD, Modeling, Wedging Angle, Rutland 913

References
[1] Hu, D., 2009, Near wake of a model horizontal-axis wind turbine, Journal of Hydrodynamics, 21 (2), 285-291.
[2] Grant, I., Mo, M., Pan, X., Parkin, P., Powell, J., Reinecke, H., Shuang, K., Coton, F., Lee, D., 2000, An experimental and numerical study of the vortex laments in the wake of an operational, horizontal-axis, wind turbine, Journal of Wind Engineering and Industrial Aerodynamics, 85, 177-189.
[3] Barnsley, M. J., Wellicome, J. F., 1992, Wind tunnel investigation of stall aerodynamics for a 1.0 m horizontal axis rotor, Journal of Wind Engineering and Industrial Aerodynamics, 39, 11-21.
[4] Ting, C. C., Lai, C. W., Huang, C. B., 2011, Developing the dual system of wind chiller integrated with wind generator, Applied Energy, 88, 741-747.
[5] Chen, T. Y., Liou, L. R., 2011, Blockage corrections in wind tunnel tests of small horizontal-axis wind turbines, Experimental Thermal and Fluid Science, 35, 565-569.
[6] Driss, Z., Triki, W., Abid, M. S., 2011, Numerical investigation of the Rutland 913 wind turbine airfoils effect on the aerodynamic structure flow, Science Academy Transactions on Renewable Energy Systems Engineering and Technology, 1 (4), 116-123.
[7] Driss, Z., Abid, M. S., 2012, Numerical and experimental study of an open circuit tunnel: aerodynamic characteristics, Science Academy Transactions on Renewable Energy Systems Engineering and Technology, 2 (1), 157-165.
[8] Wang, F., Bai, L., Fletcher, J., Whiteford, J., Cullen, D., 2008, The methodology for aerodynamic study on a small domestic wind turbine with scoop, Journal of Wind Engineering and Industrial Aerodynamics, 96, 1-24.
[9] Wang, F., Bai, L., Fletcher, J., Whiteford, J., Cullen, D., 2008, Development of small domestic wind turbine with scoop and prediction of its annual power output, Renewable Energy, 33, 1637-1651.
[10] Driss, Z., Triki, W., Abid, M. S., 2011, Caractérisation aérodynamique des éoliennes à axe horizontal équipées de rotors sphérique et elliptique, Récents Progrès en Génie des Procédés, 101, 1-6.
[11] Driss, Z., Abid, M. S., 2012, Use of the Navier-Stokes Equations to Study of the Flow Generated by Turbines Impellers, Chapter 3, Navier-Stokes Equations: Properties, Description and Applications, 51-138.
[12] Driss, Z., Ammar, M., Chtourou, W., Abid, M. S., 2011, CFD Modelling of Stirred Tanks, Chapter 5, Engineering Applications of Computational Fluid Dynamics, Vol. 1, 145-258.
[13] Driss, Z., Bouzgarrou, G., Chtourou, W., Kchaou, H., Abid, M.S., 2010, Computational studies of the pitched blade turbines design effect on the stirred tank flow characteristics, European Journal of Mechanics B/Fluids, 29, 236-245.
[14] Ammar, M., Chtourou, W., Driss, Z., Abid, M.S., 2011, Numerical investigation of turbulent flow generated in baffled stirred vessels equipped with three different turbines in one and two-stage system, Energy, 36 (8), 5081-5093.
Cite This Article
  • APA Style

    Zied Driss, Slah Driss, Walid Triki, Mohamed Salah Abid. (2016). Wedging Angle Effect on the Aerodynamic Structure of a Rutland 913 Horizontal Axis Wind Turbine. International Journal of Fluid Mechanics & Thermal Sciences, 2(1), 1-9. https://doi.org/10.11648/j.ijfmts.20160201.11

    Copy | Download

    ACS Style

    Zied Driss; Slah Driss; Walid Triki; Mohamed Salah Abid. Wedging Angle Effect on the Aerodynamic Structure of a Rutland 913 Horizontal Axis Wind Turbine. Int. J. Fluid Mech. Therm. Sci. 2016, 2(1), 1-9. doi: 10.11648/j.ijfmts.20160201.11

    Copy | Download

    AMA Style

    Zied Driss, Slah Driss, Walid Triki, Mohamed Salah Abid. Wedging Angle Effect on the Aerodynamic Structure of a Rutland 913 Horizontal Axis Wind Turbine. Int J Fluid Mech Therm Sci. 2016;2(1):1-9. doi: 10.11648/j.ijfmts.20160201.11

    Copy | Download

  • @article{10.11648/j.ijfmts.20160201.11,
      author = {Zied Driss and Slah Driss and Walid Triki and Mohamed Salah Abid},
      title = {Wedging Angle Effect on the Aerodynamic Structure of a Rutland 913 Horizontal Axis Wind Turbine},
      journal = {International Journal of Fluid Mechanics & Thermal Sciences},
      volume = {2},
      number = {1},
      pages = {1-9},
      doi = {10.11648/j.ijfmts.20160201.11},
      url = {https://doi.org/10.11648/j.ijfmts.20160201.11},
      eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ijfmts.20160201.11},
      abstract = {Numerical simulation was achieved to study the aerodynamic characteristics around horizontal axis wind turbine of Rutland 913 type. Our study has been focus on the wedging angle effect. From application of the commercial computational fluid dynamics code "Fluent", the distribution of the velocity fields and static pressure was presented in different planes of the considered control volume. These results present the local characteristics of the turbulent flow and give us informations about the wind turbine performance. Indeed, the geometrical parameters have been compared to choose the optimal conditions of the wind turbine.},
     year = {2016}
    }
    

    Copy | Download

  • TY  - JOUR
    T1  - Wedging Angle Effect on the Aerodynamic Structure of a Rutland 913 Horizontal Axis Wind Turbine
    AU  - Zied Driss
    AU  - Slah Driss
    AU  - Walid Triki
    AU  - Mohamed Salah Abid
    Y1  - 2016/07/05
    PY  - 2016
    N1  - https://doi.org/10.11648/j.ijfmts.20160201.11
    DO  - 10.11648/j.ijfmts.20160201.11
    T2  - International Journal of Fluid Mechanics & Thermal Sciences
    JF  - International Journal of Fluid Mechanics & Thermal Sciences
    JO  - International Journal of Fluid Mechanics & Thermal Sciences
    SP  - 1
    EP  - 9
    PB  - Science Publishing Group
    SN  - 2469-8113
    UR  - https://doi.org/10.11648/j.ijfmts.20160201.11
    AB  - Numerical simulation was achieved to study the aerodynamic characteristics around horizontal axis wind turbine of Rutland 913 type. Our study has been focus on the wedging angle effect. From application of the commercial computational fluid dynamics code "Fluent", the distribution of the velocity fields and static pressure was presented in different planes of the considered control volume. These results present the local characteristics of the turbulent flow and give us informations about the wind turbine performance. Indeed, the geometrical parameters have been compared to choose the optimal conditions of the wind turbine.
    VL  - 2
    IS  - 1
    ER  - 

    Copy | Download

Author Information
  • National Engineering School of Sfax (ENIS), Laboratory of Electro-Mechanic Systems (LASEM), University of Sfax, Sfax, Tunisia

  • National Engineering School of Sfax (ENIS), Laboratory of Electro-Mechanic Systems (LASEM), University of Sfax, Sfax, Tunisia

  • National Engineering School of Sfax (ENIS), Laboratory of Electro-Mechanic Systems (LASEM), University of Sfax, Sfax, Tunisia

  • National Engineering School of Sfax (ENIS), Laboratory of Electro-Mechanic Systems (LASEM), University of Sfax, Sfax, Tunisia

  • Sections