Guiding cone angle is an important parameter in the design of the spray fan, the difference of guiding cone angle has a significant impact on the spray effect and service life of the fan. Based on this, the numerical simulate of fluid-solid coupling for the pan is carried out by using the RNG k-ε model, turbulence equations and SIMPLEC algorithm, then analyze the fan’s changes of the flow field and structural under the different cone angle. Simulation results show that with the increase of the cone angle, the pressure and speed of the flow field, the stress and strain of the blade also increased, but when it over a certain angle, the result will decreases. Further analysis shows when the guiding cone angle of the fan is 20°, the performance of the fan is optimal. The results of this analysis can provide a theoretical basis for the design of the fan.
| Published in | International Journal of Fluid Mechanics & Thermal Sciences (Volume 2, Issue 3) |
| DOI | 10.11648/j.ijfmts.20160203.11 |
| Page(s) | 16-21 |
| Creative Commons |
This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited. |
| Copyright |
Copyright © The Author(s), 2016. Published by Science Publishing Group |
Spray Fan, Fluid-solid Coupling, Guiding Cone
| [1] | Yang Chun, Li Qiushi, Yuan Wei, et al. Numerical and experimental investigation of the fan structure effects on performance. [J]. Journal of Aerospace Power, 2005, 20(3): 512~517. (in China) |
| [2] | Lu Xiaolan, Fu Ximin, Wu Ping, et al. Influence of spray operating parameters on droplet deposition[J].Transactions of the Chinese Society for Agricultural Machinery, 2011, 42( 6): 70~75. ( in Chinese) |
| [3] | Guo Feng, Chen Jiandong, Guo Hui, et al. Performance optimization and advance of 3WF-8 air-assisted orchard sprayer [J].Journal of Agricultural Mechanization Research, 2010,32( 11): 48~56.( in Chinese) |
| [4] | Song Shuran, Xia Houbing, Liu Hongshan, et al. Numerical simulation and experiment of structural optimization for air-blast sprayer[J]. Transactions of the Chinese Society for Agricultural Machinery, 2013, 44(6): 73~78. ( in Chinese) |
| [5] | Liu Qing, Fu Zetian, Qi Lijun, et al. Characteristics optimization experiments of 9WZCD-25 air-blast and ultra low volume sprayer[J].Transactions of the Chinese Society for Agricultural Machinery, 2005, 36( 9): 44~47. ( in Chinese) |
| [6] | Delele M A, Jaeken P, Debaer C, et al. CFD prototyping of an air-assisted orchard sprayer aimed at drift reduction [J]. Computers and Electronics in Agriculture, 2007, 55(1): 16~27. |
| [7] | Endalew A M, Debaer C, Rutten N, et al. A new integrated CFD modeling approach towards air-assisted orchard spraying. Part I. Model development and effect of wind speed and direction on sprayer airflow [J]. Computers and Electronics in Agriculture, 2010, 71(2): 128~136. |
| [8] | Tsay J R, Liang L S, Lu L H. Evaluation of an air-assisted boom spraying system under a no-canopy condition using CFD simulation [J]. Transactions of the ASAE, 2004, 47(6): 1887~1897. |
| [9] | Zhu H, Brazee R D, Derksen R C, et al. A specially designed air-assisted sprayer to improve spray penetration and air jet velocity distribution inside dense nursery crops [J]. Transactions of the ASABE, 2006, 49(5): 1285~1294. |
| [10] | Xing Jingtang, Zhou Sheng, Cui Erjie, et al. A survey on the fluid-solid interaction mechanics. [J]. Advances in Mechanics, 1997, 27(1): 19-38. ( in Chinese) |
| [11] | Shang Jingtai. Manual for ventilator. [M]. Beijing: China Machine Press, 1996. ( in Chinese) |
| [12] | Qiu Baijing, Yan Run, Ma Jing, et al. Research Progress Analysis of Variable Rate Sprayer Technology [J]. Transactions of the Chinese Society for Agricultural Machinery, 2015, 46(3): 59-72. |
| [13] | Travis J. Esau, Qamar U. Zaman, Young K. et al. Spot-application of fungicide for wild blueberry using an automated prototype variable rate sprayer [J]. Precision Agriculture. 2014 (2) |
APA Style
Zhang Fajun, Zhang Feng, Yang Xianwei, Yang Jingjign, Li Linzi. (2016). Analysis and Research on Guiding Cone Angle Parameter of Spray Fan-Pipe. International Journal of Fluid Mechanics & Thermal Sciences, 2(3), 16-21. https://doi.org/10.11648/j.ijfmts.20160203.11
ACS Style
Zhang Fajun; Zhang Feng; Yang Xianwei; Yang Jingjign; Li Linzi. Analysis and Research on Guiding Cone Angle Parameter of Spray Fan-Pipe. Int. J. Fluid Mech. Therm. Sci. 2016, 2(3), 16-21. doi: 10.11648/j.ijfmts.20160203.11
AMA Style
Zhang Fajun, Zhang Feng, Yang Xianwei, Yang Jingjign, Li Linzi. Analysis and Research on Guiding Cone Angle Parameter of Spray Fan-Pipe. Int J Fluid Mech Therm Sci. 2016;2(3):16-21. doi: 10.11648/j.ijfmts.20160203.11
Share This Article
Twitter
Linked In
Facebook
Copy
Download@article{10.11648/j.ijfmts.20160203.11,
author = {Zhang Fajun and Zhang Feng and Yang Xianwei and Yang Jingjign and Li Linzi},
title = {Analysis and Research on Guiding Cone Angle Parameter of Spray Fan-Pipe},
journal = {International Journal of Fluid Mechanics & Thermal Sciences},
volume = {2},
number = {3},
pages = {16-21},
doi = {10.11648/j.ijfmts.20160203.11},
url = {https://doi.org/10.11648/j.ijfmts.20160203.11},
eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ijfmts.20160203.11},
abstract = {Guiding cone angle is an important parameter in the design of the spray fan, the difference of guiding cone angle has a significant impact on the spray effect and service life of the fan. Based on this, the numerical simulate of fluid-solid coupling for the pan is carried out by using the RNG k-ε model, turbulence equations and SIMPLEC algorithm, then analyze the fan’s changes of the flow field and structural under the different cone angle. Simulation results show that with the increase of the cone angle, the pressure and speed of the flow field, the stress and strain of the blade also increased, but when it over a certain angle, the result will decreases. Further analysis shows when the guiding cone angle of the fan is 20°, the performance of the fan is optimal. The results of this analysis can provide a theoretical basis for the design of the fan.},
year = {2016}
}
TY - JOUR T1 - Analysis and Research on Guiding Cone Angle Parameter of Spray Fan-Pipe AU - Zhang Fajun AU - Zhang Feng AU - Yang Xianwei AU - Yang Jingjign AU - Li Linzi Y1 - 2016/11/30 PY - 2016 N1 - https://doi.org/10.11648/j.ijfmts.20160203.11 DO - 10.11648/j.ijfmts.20160203.11 T2 - International Journal of Fluid Mechanics & Thermal Sciences JF - International Journal of Fluid Mechanics & Thermal Sciences JO - International Journal of Fluid Mechanics & Thermal Sciences SP - 16 EP - 21 PB - Science Publishing Group SN - 2469-8113 UR - https://doi.org/10.11648/j.ijfmts.20160203.11 AB - Guiding cone angle is an important parameter in the design of the spray fan, the difference of guiding cone angle has a significant impact on the spray effect and service life of the fan. Based on this, the numerical simulate of fluid-solid coupling for the pan is carried out by using the RNG k-ε model, turbulence equations and SIMPLEC algorithm, then analyze the fan’s changes of the flow field and structural under the different cone angle. Simulation results show that with the increase of the cone angle, the pressure and speed of the flow field, the stress and strain of the blade also increased, but when it over a certain angle, the result will decreases. Further analysis shows when the guiding cone angle of the fan is 20°, the performance of the fan is optimal. The results of this analysis can provide a theoretical basis for the design of the fan. VL - 2 IS - 3 ER -
Information
Email: