Design System Development for a Fuel Cell Centrifugal Compressor

Cheng Xu; Lei Chen; Ryoichi Amano

doi:doi:10.11648/j.ijfmts.20190504.12

| Peer-Reviewed

Design System Development for a Fuel Cell Centrifugal Compressor

Cheng Xu, Lei Chen, Ryoichi Amano

Published in International Journal of Fluid Mechanics & Thermal Sciences (Volume 5, Issue 4)

Received: 22 September 2019 Accepted: 22 October 2019 Published: 5 November 2019

Views: Downloads:

Download PDF

Share This Article

Twitter
Linked In
Facebook

Abstract

Centrifugal compressors have been used in many areas of the machinery. The centrifugal compressor design is very complex, and a unique design system needs to be developed. A centrifugal compressor design system should be easy to use in interface and also flexible for inputs and outputs. The design tool also needs to be able to predicate the compressor performance in a fairly accurate level. In this study, a centrifugal compressor design system which was developed in the past is further improved and developed. Current design system includes initial parameter studies, meanline analysis, throughflow calculation, impeller design, diffusser design, volute design, and structure analysis. The main improvements of the design system are adding the interface to allow users easy to use, adding the input and output capabilities and modifying few correlations. Current design system can predict the blade loading and compressor performance better compared with original design system. A fuel cell low flow and low specific speed centrifugal compressor is designed by using current design system and the prototype compressor is built. The compressor performance tests were conducted. The experimental results are compared with numerical analysis. The experiments are in good agreements with calculations. The results demonstrate that the centrifugal compressor design is successful and the design system can be used for the future centrifugal compressor designs.

Published in	International Journal of Fluid Mechanics & Thermal Sciences (Volume 5, Issue 4) This article belongs to the Special Issue Fluid Mechanics & Thermal Sciences in Turbomachines
DOI	10.11648/j.ijfmts.20190504.12
Page(s)	96-101
Creative Commons	This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.
Copyright	Copyright © The Author(s), 2019. Published by Science Publishing Group

Keywords

Turbomachinery Designs, Computational Fluid Dynamics (CFD), Centrifugal Compressors, Low Flow and Low Specific Speed Compressors

References

[1]	R. H. Aungier, Centrifugal Compressors: A strategy for Aerodynamics Design and Analysis, ASME, Press, New York, USA, (2000).
[2]	C. Xu and M. Muller, The design and development of low solidity centrifugal compressor volute. (2006), International Journal of Rotating Machinery, 2006.
[3]	C. Xu and R. S. Amano, Computational Analysis of Scroll Tongue Shape to Compressor Performance by Using Different Turbulence Models, International Journal for Computational Methods in Engineering Science and Mechanics, Vol. 11 No. 2, 85-99, 2010.
[4]	C. Xu, H. Yang, Y. Jiang, and Z. Yi. The Development of an Integrally Geared Centrifugal Compressor. International Journal of Fluid Mechanics & Thermal Sciences. Vol. 5, No. 1, (2019) 1-9. doi: 10.11648/j.ijfmts.20190501.11.
[5]	C. Xu, Design Experience and considerations for centrifugal compressor development, Journal of aerospace engineering 221 (2007) 273-287. Proceedings of the institution of Mechanical Engineers, Part G: Journal of aerospace engineering, 221 (2), pp 273-287.
[6]	C. Xu, R. S. Amano, Empirical Design Considerations for Industrial Centrifugal Compressors, International Journal of Rotating Machinery, 2012 (2012) 1-16.
[7]	C. Xu, R. S., Development of a Low Flow Coefficient Single Stage Centrifugal Compressor, International Journal for Computational Methods in Engineering Science and Mechanics, 10 (2009) 282–289.
[8]	C. Xu, R. S. Amano, The Development of a Centrifugal Compressor Impeller, International Journal for Computational Methods in Engineering Science and Mechanics, 10 (2009) 290–301.
[9]	C. Xu, R. S. Amano, Study of the flow in a centrifugal compressor, Int. J. of Fluid Machinery and System, 3 (3) (2010), pp 260-270, 2010.3.3.260.
[10]	M. G. Turner, A. Merchant, D. Bruna, A Turbomachinery Design Tool for Teaching Concepts for Axial-Flow fans, compressor, and Turbines, GT2006-90105, May 8-11, 2006, Barcelona, Spain.
[11]	C. Xu, R. S. Amano, On the Development of Turbomachine Blade Aerodynamic Design System, International Journal for Computational Methods in Engineering Science and Mech, 10 (3) (2009), pp. 186-196, 10.1080/15502280902795052.
[12]	C. Xu, Kutta condition for sharp edge flows, Mechanics Research Communications, Vol 25, No. 4, July 1998.
[13]	S. Pischinger, C. Schönfelder, W. Bornscheuer, H. Kindl, A. Wiartalla, Integrated Air Supply and Humidification Concepts for Fuel Cell Systems, SAE Paper 2001-01-0233, SAE International, Warrendale, PA, (2001).
[14]	C. Xu, R. S. Amano, Computational Analysis of Swept Compressor Rotor Blades,” International Journal for Computational Methods in Engineering Science and Mechanics, 9 (6), 374–382, (2008), 10.1080/15502280802365840.
[15]	C. Xu, R. S. Amano, Effects of Asymmetric Radial Clearance on Performance of a Centrifugal Compressor, ASME, Journal of Energy Resources Technology 140 (5), (2017), DOI: 10.1115/1.4038387.
[16]	C. Xu, R. S. Amano, Centrifugal Compressor Performance Improvements Through Impeller Splitter Location, J. Energy Resour. Technol. 140 (5), (2017), doi: 10.1115/1.4037813.
[17]	J. Gonzalez, J. Fernandez, E. Blanco, and C. Santolaria, Numerical Simulation of Dynamic Effects Due to Impeller-Volute Interaction in a Centrifugal Pump, ASME J. Fluids Eng., 124, (2002), 10.1115/1.1457452.
[18]	R. V. Chima, A three-dimensional unsteady CFD model of compressor stability, ASME Turbo Expo 2006, Power for Land, Sea, and Air, pp. 1157–1168. American Society of Mechanical Engineers (2006).
[19]	J. Denton, W. Dawes, Computational fluid dynamics for turbomachinery design, Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 213 (2), 107–124 (1998).
[20]	H. P. Dickmann, T. S. Wimmel, J. Szwedowicz, D. Filsinger, C. H. Roduner, Unsteady flow in a turbocharger centrifugal compressor, Three-dimensionalcomputational fluid dynamics simulation and numerical and experimental analysis of impeller blade vibration. Journal of turbomachinery 128 (3), 455–465 (2006).
[21]	C. Xu, R. S. Amano, Aerodynamic and structure considerations in centrifugal compressor design-blade lean effects, GT2012-68027 (2012).
[22]	ANSYS Inc., Ansys version 15, ANSYS, Inc, 275 Technology Drive, Canonsburg, PA 15317, (2013).

Cite This Article

Plain Text BibTeX RIS

APA Style

Cheng Xu, Lei Chen, Ryoichi Amano. (2019). Design System Development for a Fuel Cell Centrifugal Compressor. International Journal of Fluid Mechanics & Thermal Sciences, 5(4), 96-101. https://doi.org/10.11648/j.ijfmts.20190504.12

Copy | Download

ACS Style

Cheng Xu; Lei Chen; Ryoichi Amano. Design System Development for a Fuel Cell Centrifugal Compressor. Int. J. Fluid Mech. Therm. Sci. 2019, 5(4), 96-101. doi: 10.11648/j.ijfmts.20190504.12

Copy | Download

AMA Style

Cheng Xu, Lei Chen, Ryoichi Amano. Design System Development for a Fuel Cell Centrifugal Compressor. Int J Fluid Mech Therm Sci. 2019;5(4):96-101. doi: 10.11648/j.ijfmts.20190504.12

Copy | Download

@article{10.11648/j.ijfmts.20190504.12,
  author = {Cheng Xu and Lei Chen and Ryoichi Amano},
  title = {Design System Development for a Fuel Cell Centrifugal Compressor},
  journal = {International Journal of Fluid Mechanics & Thermal Sciences},
  volume = {5},
  number = {4},
  pages = {96-101},
  doi = {10.11648/j.ijfmts.20190504.12},
  url = {https://doi.org/10.11648/j.ijfmts.20190504.12},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ijfmts.20190504.12},
  abstract = {Centrifugal compressors have been used in many areas of the machinery. The centrifugal compressor design is very complex, and a unique design system needs to be developed. A centrifugal compressor design system should be easy to use in interface and also flexible for inputs and outputs. The design tool also needs to be able to predicate the compressor performance in a fairly accurate level. In this study, a centrifugal compressor design system which was developed in the past is further improved and developed. Current design system includes initial parameter studies, meanline analysis, throughflow calculation, impeller design, diffusser design, volute design, and structure analysis. The main improvements of the design system are adding the interface to allow users easy to use, adding the input and output capabilities and modifying few correlations. Current design system can predict the blade loading and compressor performance better compared with original design system. A fuel cell low flow and low specific speed centrifugal compressor is designed by using current design system and the prototype compressor is built. The compressor performance tests were conducted. The experimental results are compared with numerical analysis. The experiments are in good agreements with calculations. The results demonstrate that the centrifugal compressor design is successful and the design system can be used for the future centrifugal compressor designs.},
 year = {2019}
}

Copy | Download

TY - JOUR
T1 - Design System Development for a Fuel Cell Centrifugal Compressor
AU - Cheng Xu
AU - Lei Chen
AU - Ryoichi Amano
Y1 - 2019/11/05
PY - 2019
N1 - https://doi.org/10.11648/j.ijfmts.20190504.12
DO - 10.11648/j.ijfmts.20190504.12
T2 - International Journal of Fluid Mechanics & Thermal Sciences
JF - International Journal of Fluid Mechanics & Thermal Sciences
JO - International Journal of Fluid Mechanics & Thermal Sciences
SP - 96
EP - 101
PB - Science Publishing Group
SN - 2469-8113
UR - https://doi.org/10.11648/j.ijfmts.20190504.12
AB - Centrifugal compressors have been used in many areas of the machinery. The centrifugal compressor design is very complex, and a unique design system needs to be developed. A centrifugal compressor design system should be easy to use in interface and also flexible for inputs and outputs. The design tool also needs to be able to predicate the compressor performance in a fairly accurate level. In this study, a centrifugal compressor design system which was developed in the past is further improved and developed. Current design system includes initial parameter studies, meanline analysis, throughflow calculation, impeller design, diffusser design, volute design, and structure analysis. The main improvements of the design system are adding the interface to allow users easy to use, adding the input and output capabilities and modifying few correlations. Current design system can predict the blade loading and compressor performance better compared with original design system. A fuel cell low flow and low specific speed centrifugal compressor is designed by using current design system and the prototype compressor is built. The compressor performance tests were conducted. The experimental results are compared with numerical analysis. The experiments are in good agreements with calculations. The results demonstrate that the centrifugal compressor design is successful and the design system can be used for the future centrifugal compressor designs.
VL - 5
IS - 4
ER -

Copy | Download

Author Information

Cheng Xu

Department of Mechanical Engineering, University of Wisconsin-Milwaukee, Milwaukee, USA
Lei Chen

Department of Architecture, University of South China, Hengyang, P. R. China
Ryoichi Amano

Department of Mechanical Engineering, University of Wisconsin-Milwaukee, Milwaukee, USA

Download PDF

Sections

Plain Text BibTeX RIS

APA Style

Cheng Xu, Lei Chen, Ryoichi Amano. (2019). Design System Development for a Fuel Cell Centrifugal Compressor. International Journal of Fluid Mechanics & Thermal Sciences, 5(4), 96-101. https://doi.org/10.11648/j.ijfmts.20190504.12

Copy | Download

ACS Style

Cheng Xu; Lei Chen; Ryoichi Amano. Design System Development for a Fuel Cell Centrifugal Compressor. Int. J. Fluid Mech. Therm. Sci. 2019, 5(4), 96-101. doi: 10.11648/j.ijfmts.20190504.12

Copy | Download

AMA Style

Cheng Xu, Lei Chen, Ryoichi Amano. Design System Development for a Fuel Cell Centrifugal Compressor. Int J Fluid Mech Therm Sci. 2019;5(4):96-101. doi: 10.11648/j.ijfmts.20190504.12

Copy | Download

@article{10.11648/j.ijfmts.20190504.12,
  author = {Cheng Xu and Lei Chen and Ryoichi Amano},
  title = {Design System Development for a Fuel Cell Centrifugal Compressor},
  journal = {International Journal of Fluid Mechanics & Thermal Sciences},
  volume = {5},
  number = {4},
  pages = {96-101},
  doi = {10.11648/j.ijfmts.20190504.12},
  url = {https://doi.org/10.11648/j.ijfmts.20190504.12},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ijfmts.20190504.12},
  abstract = {Centrifugal compressors have been used in many areas of the machinery. The centrifugal compressor design is very complex, and a unique design system needs to be developed. A centrifugal compressor design system should be easy to use in interface and also flexible for inputs and outputs. The design tool also needs to be able to predicate the compressor performance in a fairly accurate level. In this study, a centrifugal compressor design system which was developed in the past is further improved and developed. Current design system includes initial parameter studies, meanline analysis, throughflow calculation, impeller design, diffusser design, volute design, and structure analysis. The main improvements of the design system are adding the interface to allow users easy to use, adding the input and output capabilities and modifying few correlations. Current design system can predict the blade loading and compressor performance better compared with original design system. A fuel cell low flow and low specific speed centrifugal compressor is designed by using current design system and the prototype compressor is built. The compressor performance tests were conducted. The experimental results are compared with numerical analysis. The experiments are in good agreements with calculations. The results demonstrate that the centrifugal compressor design is successful and the design system can be used for the future centrifugal compressor designs.},
 year = {2019}
}

Copy | Download