Advances in Materials

Editorial Board Members (102)
  • Prof. Mounim Lebrini
    Faculty of Science, Technology, and Environment, University of the Antilles, Martinique, France
  • Assist. Prof. Njemuwa Nwaji
    Institute of Fundamental Technological Research, Polish Academy of Science, Warsaw, Poland
  • Dr. Hamid Pourasiabi
    School of Mechanical and Mining Engineering, The University of Queensland, Brisbane, Australia
  • Dr. Yang Yang
    Department of Materials Science and Engineering, University of Florida, Gainesville, United States
  • Dr. Flavia da Cruz Gallo
    Department of Materials Science and Engineering, University of Florida, Gainesville, United States
  • Dr. Wei Che
    School of Energy and Chemical Engineering, Ulsan National Institute of Science and Technology, Ulsan, South Korea
  • Dr. Rahul Majee
    Department of Chemistry, University of St Andrews, St Andrews, United Kingdom
  • Dr. José Ferreira
    Department of Materials Science and Engineering, Iowa State University, Ames, United States
  • Dr. Putrakumar Bala
    Department of Chemical Engineering and Applied Chemistry, Chungnam National University, Daejeon, South Korea
  • Dr. Dineshkumar Sengottuvelu
    Center for Graphene Research and Innovation, University of Mississippi, Oxford, United States
  • Alka Pareek
    Research Laboratory of Chemical Film Technologies, Tallinn University of Technology, Tallinn, Estonia
  • Halil Murat Enginsoy
    Mechanical and Manufacturing Engineering School, Supmeca-Paris/Quartz-France, Paris, France
  • Ashutosh Kumar
    Institut de Chimie Moléculaire et des Matériaux d'Orsay, University of Paris Saclay, Orsay, France
  • Tian Tian
    Department of Chemical Engineering, Carnegie Mellon University, Pittsburgh, United States
  • Shatabda Bhattacharya
    Graduate School of Engineering Sciences, Osaka University, Osaka, Japan
  • Chang Liu
    Chemistry and Nanoscience Center, National Renewable Energy Laboratory, Golde, United States
  • Prof. Lucía Fabiola Cano Salazar
    Department of Advanced Materials, Faculty of Chemical Sciences, Autonomous University of Coahuila, Saltillo, Mexico
  • Prof. Shiwei Shi
    School of Mechanical Engineering, Dalian University of Technology, Dalian, China
  • Assoc. Prof. Shaohui Xiong
    School of Materials Science and Engineering, Hunan University of Science and Technology, Xiangtan, China
  • Assoc. Prof. Wei Xiao
    School of Mechatronic and Vehicle Engineering, East China Jiaotong University, Nanchang, China
  • Assoc. Prof. Zain Bairq
    Department of Civil Engineering, Changsha University, Changsha, China
  • Assoc. Prof. Xu Chen
    School of Physics and Microelectronics, Zhengzhou University, Zhengzhou, China
  • Assoc. Prof. Muhammad Yar Khan
    School of Material Science and Engineering, Zhejiang University, Hangzhou, China
  • Assoc. Prof. Fandong Meng
    College of Chemical and Biological Engineering, Zhejiang University, Hangzhou, China
  • Assoc. Prof. Bo Zhang
    School of Integrated Circuit, Beijing University of Posts and Telecommunications, Beijing, China
  • Assoc. Prof. Yancheng Meng
    Key Laboratory for Intelligent Nano Materials and Devices of the Ministry of Education, State Key Laboratory of Mechanics and Control of Mechanical Structures, Nanjing University of Aeronautics and Astronautics, Nanjing, China
  • Dr. Feng Gao
    Special Polymer Research Institute, Institute of Zhejiang University –Quzhou, Quzhou, China
  • Dr. Kelly Leite dos Santos Castro Assis
    Materials Metrology Division, National Institute of Metrology, Quality and Technology, Rio de Janeiro, Brazil
  • Dr. Guanxi Liu
    Division of Surface Engineering Research, Beijing Institute of Aeronautical Materials, Beijing, China
  • Dr. Junyi Che
    Institute of Translational Medicine, Nanjing Drum Tower Hospital, Nanjing, China
  • Gilberto Pavani
    Federal Institute of Rio Grande do Sul, Bento Gonçalves, Brazil
  • Zhenghua Tang
    Department of Metallic Materials, School of Materials Science and Engineering, Sichuan University, Chengdu, China
  • Dan Wu
    School of Materials Science and Engineering, Wuhan Institute of Technology, Wuhan, China
  • Xiaolong Xu
    College of Materials Science and Engineering, North University of China, Taiyuan, China
  • Sarah Mendes
    Department of Engineering, UERJ - Universidade do Estado do Rio de Janeiro, Rio de Janeiro, Brazil
  • Tingping Hou
    College of Science, Wuhan University of Science and Technology, Wuhan, China
  • Lili Feng
    College of Materials Science and Chemical Engineering, Harbin Engineering University, Harbin, China
  • Dr. Lerato Hlekelele
    Department of Chemicals, Council for Scientific and Industrial Research, Pretoria, South Africa
  • Charoen Nakason
    Prince of Songkla University, Surat Thani, Thailand
  • Maria Mathabathe
    Department of Science and Technology, Council for Scientific and Industrial Research, Pretoria, South Africa
  • Prof. Neeraja Katta
    Department of Physics, Narasaraopeta Engineering College, Guntur, India
  • Assist. Prof. Vikash Mishra
    Department of Physics, Manipal Institute of Technology, Manipal, India
  • Assist. Prof. Md. Motin Seikh
    Department of Chemistry, Visva-Bharati University, Santiniketan, India
  • Assoc. Prof. Mallieswaran Kuppusamy
    Department of Mechanical Engineering, CK College of Engineering & Technology, Cuddalore, India
  • Dr. Nagaraj S
    Advanced Materials Laboratory, Council of Scientific and Industrial Research–Central Leather Research Institute, Chennai, India
  • Dr. Umer Mushtaq
    Department of Physics, National Institute of Technology, Srinagar, Srinagar, India
  • Dr. Abhishek Ghosh
    Department of Metallurgy and Materials Engineering, Indian Institute of Engineering Science and Technology, Howrah, India
  • Dr. Bala Ismail Adamu
    Department of Physics, Federal University Dutse, Dutse, Nigeria
  • Sharath B.N
    Department of mechanical Engineering, Malnad College of Engineering, Hassan, India
  • Bachir Yaou Balarabe
    Department of Nanotechnology, School of Engineering and Technology, National Forensic Sciences University, Gandhinagar, India
  • Chellasamy Velu
    Center for Nanoscience and Technology, Pondicherry University, Pondicherry, India
  • Prof. Enrique Flórez-Gil
    Department of Health Science, Universidad Isabel I, Burgos, Spain
  • Assoc. Prof. Yassine Beldjoudi
    Department of Natural and Medical Sciences Research Centre, University of Nizwa, Birkat Almouz, Oman
  • Dr. Aniruddha Basu
    Renewable and Sustainable Energy Institute, University of Colorado, Boulder, United States
  • Dr. Chenjing Yang
    School of Engineering and Apllied Sciences, Harvard University, Boston, United States
  • Dr. Jobin Varghese
    Hybrid Microsystems, Fraunhofer IKTS, Dresden, Germany
  • Dr. Kalaiselvan Ganesan
    Department of Physics, University of Cambridge, Cambridge, United Kingdom
  • Dr. Laura Francés Soriano
    Institute of Molecular Science, University of Valencia, Paterna, Spain
  • Dr. Deliang Guo
    GE Vernova Advanced Research, Niskayuna, United States
  • Dr. Aniruddha Molla
    Department of Chemical Engineering, Inha University, Incheon, South Korea
  • Aliouat Mouaad Yassine
    Department of Physics, Institut Matériaux Microélectronique Nanosciences de Provence, Aix-Marseille University, Marseille, France
  • Mehrdad Rostami Osanloo
    Department of Physics, The University of Texas at Dallas, Richardson, United States
  • Prashanth Sandineni
    Department of Chemistry, Missouri University of Science and Technology, Rolla, United States
  • Vediyappan Thirumal
    School of Mechanical Engineering, Yeungnam University, Daegu, South Korea
  • Beko Mesic
    Department of Engineering and Chemical Sciences, Karlstad University, Karlstad, Sweden
  • Dongmei Dong
    Department of Physics and Astronomy, Rowan University, New Jersey, United States
  • Prof. Shujie Jiao
    School of Materials Science and Engineering , Harbin Institute of Technology, Harbin, China
  • Prof. Zhen Zhang
    School of Materials Science and Engineering, Northwestern Polytechnical University, Xi'an, China
  • Assoc. Prof. Xiangkai Kong
    Department of New Energy Materials and Devices, China University of Mining and Technology, Xuzhou, China
  • Assoc. Prof. Xingda An
    Institute of Functional Nano and Soft Materials (FUNSOM), Soochow University, Suzhou, China
  • Assoc. Prof. Sabahattin Deniz
    Department of Textile Engineering, Marmara University, Istanbul, Turkey
  • Assoc. Prof. Yuanyuan Huang
    College of Engineering and Technology, Southwest University, Chongqing, China
  • Assoc. Prof. Luqing Cui
    School of Mechanical Engineering, Xi’an Jiaotong University, Xi’an, China
  • Assoc. Prof. Liyong Wang
    School of Energy and Power Engineering, North University of China, taiyuan, China
  • Assoc. Prof. Rongjian Pan
    The First Sub-Institute, Nuclear Power Institute of China, Chengdu, China
  • Assoc. Prof. Renxing Lin
    College of Engineering and Applied Sciences, Nanjing University, Nanjing, China
  • Dr. Zhiyong Sun
    College of Biotechnology and Bioengineering, Zhejiang University of Technology, Hangzhou, China
  • Dr. Syed Ul Hasnain Bakhtiar
    School of Integrated Circuits, Huazhong University of Science and Technology, Wuhan, China
  • Dr. Changcun Li
    School of Materials Science and Engineering, University of Jinan, Jinan, China
  • Dr. Wang Zhinan
    College of Chemistry and Materials Engineering, Zhejiang A&F University, Hangzhou, China
  • Dr. Magdalena-Valentina Lungu
    Department of Metallic, Composite and Polymeric Materials, National Institute for Research and Development in Electrical Engineering ICPE-CA (INCDIE ICPE – CA), Bucharest, Romania
  • Fujuan Liu
    College of Textile and Clothing Engineering, Soochow University, Suzhou, China
  • Wenhan Zhou
    School of Materials Science and Engineering, Nanjing University of Science and Technology, Nanjing, China
  • Haitao Zhang
    School of Materials Science and Engineering, Southwest Jiaotong university, Chengdu, China
  • Jun Xia
    School of Materials Science and Engineering, Beihang University, Beijing, China
  • Qingguo Shao
    School of Materials Science and Engineering, China University of Petroleum (East China), Qingdao, China
  • Wanneng Ye
    Department of Physics, Qingdao University, Qingdao, China
  • Haijun He
    College of Textile Science and Engineering, Jiangnan University, Wuxi, China
  • Imène Hebbar
    Department of Mechanical Engineering, University of Technologie, Mostaganem, Algeria
  • Nabil Hebbar
    Department of Architecture, Faculty of science and technology, Abdelhamid Ibn Badis University, Mostaganem, Algeria
  • Prof. Ganesh Patil
    Department of Physics, SNJB's KKHA Arts, SMGL Commerce and SPHJ Science College, Chandwad, India
  • Prof. Shobha Waghmode
    Department of Chemistry, MES Abasaheb Garware College, Pune, Pune, India
  • Assist. Prof. Tarak Nath Mandal
    Department of Chemistry, SRM Institute of Science and Technology, Kattankulathur, Chennai, India
  • Assoc. Prof. Manisha Singh
    Department of Physics, Amity University Gwalior, Gwalior, India
  • Assoc. Prof. Boopathy Govindarajan
    Department of Aeronautical Engineering, Vel Tech Rangarajan Dr.Sagunthala R&D Institute of Science and Technology, Chennai, India
  • Dr. Sreeram P R
    Department of Metallurgical and Materials Engineering, Indian Institute of Technology Kharagpur, Kharagpur, India
  • Dr. Irfan Ayoub
    Department of Physics, National Institute of Technology, Srinagar, India
  • Dr. Kuldeep Singh Gour
    Advanced Materials and Corrosion Division, Council of Scientific and Industrial Research-National Metallurgical Laboratory, Jamshedpur, India
  • Shobhnath Gupta
    Department of Chemistry, Indian Institute of Technology Bombay, Mumbai, India
  • Krutika Routray
    Department of Physics, C. V. Raman Global University, Bhubaneswar, India
  • Y. Ashok Kumar Reddy
    Indian Institute of Information Technology, Design and Manufacturing, (IIITDM) Kancheepuram, Chennai, India
  • Adityanarayan Pandey
    Department of Electrical Engineering, Indian Institute of Technology Bombay, Mumbai, India