The background typically involved regulator control loops in cells for distribution of atoms. Ceramics due to their surface integrity are challenging to alter the external parts regions. This produced supply of ions from one end to another. The objective of the research was to develop a method of resurfacing of ceramics inch by inch with formation and accuracy of the design. The method consisted of configuring a cathode and anode for ionic transfer of important unique properties from a material to another within a solution. The results showed a high surface integrity. This had a high adhesion between the grains of the anode from the cathode. Therefore, was an improvement of conventional techniques of development of ceramics. The ionic plating used less consumption of resources and at lower work done and greenhouse gas emissions to the surrounding environment. This was a more useful and works well with the development of ceramics. To produce a high quality to the initial material. It concluded this design could use a connected loop to produce the deposition of atoms of another element (rare) unto a ceramic surface. To ensure improved properties such as wear resistance, high detail appearance and ergonomic use. These used in a product in the industry.
| Published in | Advances (Volume 3, Issue 2) |
| DOI | 10.11648/j.advances.20220302.12 |
| Page(s) | 38-41 |
| Creative Commons |
This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited. |
| Copyright |
Copyright © The Author(s), 2022. Published by Science Publishing Group |
Ceramic, Ion, Plating
| [1] | Anode. (2022.). Retrieved 3 8, 2022, from Wikipedia: The Free Encyclopedia: http://en.wikipedia.org/wiki/Anode |
| [2] | Bisetti, F., Attili, A., & Pitsch, H. (2014). Advancing predictive models for particulate formation in turbulent flames via massively parallel direct numerical simulations. Philosophical Transactions of the Royal Society A, 372 (2022), 20130324-20130324. Retrieved 3 8, 2022, from https://royalsocietypublishing.org/doi/pdf/10.1098/rsta.2013.0324 |
| [3] | Cathode. (2022). Retrieved 3 9, 2022, from Wikipedia: The Free Encyclopedia: http://en.wikipedia.org/wiki/Cathode Ceramic. (n.d.). Retrieved 3 8, 2022, from Wikipedia: The Free Encyclopedia: http://en.wikipedia.org/wiki/Ceramic |
| [4] | Electrochemical Cells. (2022). Retrieved 3 8, 2022, from http://hyperphysics.phy-astr.gsu.edu/hbase/Chemical/electrochem.html#c3 |
| [5] | Friesel, D. (1996). The Indiana Cooler Injector Synchrotron 1995-1996 Status Report. Retrieved 3 8, 2022, from https://scholarworks.iu.edu/dspace/handle/2022/353?show=full |
| [6] | Hamdi, H., Rodrigues, M., Mechmeche, C., & Braiek, N. B. (2019). Fault diagnosis based on sliding mode observer for LPV descriptor systems. Asian Journal of Control, 21 (1), 89-98. Retrieved 3 8, 2022, from https://onlinelibrary.wiley.com/doi/pdf/10.1002/asjc.2022 |
| [7] | Liu, A. (2015). Design and simulation of the nuSTORM facility. Retrieved 3 8, 2022, from http://inspirehep.net/record/1370195 |
| [8] | Plating. (2022). Retrieved 3 9, 2022, from Wikipedia: The Free Encyclopedia: http://en.wikipedia.org/wiki/Plating |
| [9] | Rutkowski, L. (2014). Sensitivity of Achievement Estimation to Conditioning Model Misclassification. Applied Measurement in Education, 27 (2), 115-132. Retrieved 3 8, 2022, from https://scholarworks.iu.edu/dspace/handle/2022/17238 |
| [10] | Saha, J., & Gupta, S. K. (2017). A novel electro-chlorinator using low-cost graphite electrode for drinking water disinfection. Ionics, 23 (7), 1903-1913. Retrieved 3 8, 2022, from https://link.springer.com/article/10.1007/s11581-017-2022-0 |
| [11] | Wang, Y., Mansour, N. S., Salem, A. F., Brennan, K., & Ruden, P. P. (1993). Theoretical study of potential ultralow-noise confined-state photodetectors. Retrieved 3 8, 2022, from https://ui.adsabs.harvard.edu/abs/1993spie.2022.144w/abstract |
| [12] | Chen J., Li Y., Zhang H., Lu Z. (2020). A Novel SOFC Thermal Management Strategy of SOFC-GT Hybrid System with Anode and Cathode Control Loops. Volume 5: Controls, Diagnostics, and Instrumentation; Cycle Innovations; Cycle Innovations: Energy Storage. |
| [13] | Yi Z. (2021). High-ionicity Fluorophosphate Lattice via Aliovalent Substitution as Advanced Cathode Materials in Sodium-ion Batteries. InfoMat. |
| [14] | Mather G. (2021). Perspectives on Cathodes for Protonic Ceramic Fuel Cells. Applied Sciences. |
| [15] | Fu J et al. (2022). Enhanced Electrodesorption Performance via Cathode Potential Extension During Capacitive Deionization. Applied Sciences. |
APA Style
Solomon Ubani. (2022). Ionic Plating of Ceramic Anode via Cathode Loop Design. Advances, 3(2), 38-41. https://doi.org/10.11648/j.advances.20220302.12
ACS Style
Solomon Ubani. Ionic Plating of Ceramic Anode via Cathode Loop Design. Advances. 2022, 3(2), 38-41. doi: 10.11648/j.advances.20220302.12
Share This Article
Twitter
Linked In
Facebook
Copy
Download@article{10.11648/j.advances.20220302.12,
author = {Solomon Ubani},
title = {Ionic Plating of Ceramic Anode via Cathode Loop Design},
journal = {Advances},
volume = {3},
number = {2},
pages = {38-41},
doi = {10.11648/j.advances.20220302.12},
url = {https://doi.org/10.11648/j.advances.20220302.12},
eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.advances.20220302.12},
abstract = {The background typically involved regulator control loops in cells for distribution of atoms. Ceramics due to their surface integrity are challenging to alter the external parts regions. This produced supply of ions from one end to another. The objective of the research was to develop a method of resurfacing of ceramics inch by inch with formation and accuracy of the design. The method consisted of configuring a cathode and anode for ionic transfer of important unique properties from a material to another within a solution. The results showed a high surface integrity. This had a high adhesion between the grains of the anode from the cathode. Therefore, was an improvement of conventional techniques of development of ceramics. The ionic plating used less consumption of resources and at lower work done and greenhouse gas emissions to the surrounding environment. This was a more useful and works well with the development of ceramics. To produce a high quality to the initial material. It concluded this design could use a connected loop to produce the deposition of atoms of another element (rare) unto a ceramic surface. To ensure improved properties such as wear resistance, high detail appearance and ergonomic use. These used in a product in the industry.},
year = {2022}
}
TY - JOUR T1 - Ionic Plating of Ceramic Anode via Cathode Loop Design AU - Solomon Ubani Y1 - 2022/06/09 PY - 2022 N1 - https://doi.org/10.11648/j.advances.20220302.12 DO - 10.11648/j.advances.20220302.12 T2 - Advances JF - Advances JO - Advances SP - 38 EP - 41 PB - Science Publishing Group SN - 2994-7200 UR - https://doi.org/10.11648/j.advances.20220302.12 AB - The background typically involved regulator control loops in cells for distribution of atoms. Ceramics due to their surface integrity are challenging to alter the external parts regions. This produced supply of ions from one end to another. The objective of the research was to develop a method of resurfacing of ceramics inch by inch with formation and accuracy of the design. The method consisted of configuring a cathode and anode for ionic transfer of important unique properties from a material to another within a solution. The results showed a high surface integrity. This had a high adhesion between the grains of the anode from the cathode. Therefore, was an improvement of conventional techniques of development of ceramics. The ionic plating used less consumption of resources and at lower work done and greenhouse gas emissions to the surrounding environment. This was a more useful and works well with the development of ceramics. To produce a high quality to the initial material. It concluded this design could use a connected loop to produce the deposition of atoms of another element (rare) unto a ceramic surface. To ensure improved properties such as wear resistance, high detail appearance and ergonomic use. These used in a product in the industry. VL - 3 IS - 2 ER -
Information
Email: