In this paper, the current state of art of optical fiber sensing technology is reviewed. The basics of operating principle are discussed in detailed and the various types of optical fiber sensors are classified. The performances, the limitations and a description of the technology used to fabricate the optical fiber sensors have presented. Also, the development of this technology and the expected application areas are briefly outlined.
| Published in | American Journal of Remote Sensing (Volume 6, Issue 1) |
| DOI | 10.11648/j.ajrs.20180601.11 |
| Page(s) | 1-5 |
| Creative Commons |
This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited. |
| Copyright |
Copyright © The Author(s), 2018. Published by Science Publishing Group |
Optical Fiber Devices, Optical Fiber Sensors, Optical Interferometry, Modulation Techniques
| [1] | Jones, D., Introduction to Fiber Optics, Naval Education and Training Professional Development and Technology Center, 1998. |
| [2] | Hisham K. Hisham, Ahmed F. Abas, Ghafour A. Mahdiraji, Mohammd A. Mahdi and Ahmed S. Muhammad Noor, “Relative Intensity Noise Reduction by Optimizing Fiber Grating Fabry–Perot Laser Parameters’, IEEE J. Quantum Electron., vol. 48, pp. 385-393, 2012. |
| [3] | Hisham K. Hisham, Ahmed F. Abas, Ghafour A. Mahdiraji, Mohammd A. Mahdi and Fasial R. M. Adkan, “Characterization of Turn-On Time Delay in a Fiber Grating Fabry-Perot Lasers”, IEEE Photonics Journal, 2013. |
| [4] | Hisham K. Hisham, Ahmed F. Abas, Ghafour A. Mahdiraji, Mohammd A. Mahdi and Fasial R. M. Adkan, “Frequency Modulation Response due to the Intensity Modulation of a Fiber Grating Fabry-Perot Lasers”, J. Modern Optics, 2014. |
| [5] | Hisham K. Hisham, “Numerical Analysis of Thermal Dependence of the Spectral Response of Polymer Optical Fiber Bragg Grating”, Iraq J. Electrical and Electronic Engineering, 2016. |
| [6] | Hisham K. Hisham, “Effect of Temperature Variations on Strain Response of Polymer Bragg Grating Optical Fiber”, Iraq J. Electrical and Electronic Engineering, 2017. |
| [7] | Hisham K. Hisham, “Bandwidth Characteristics of FBG Sensors for Oil and Gas Applications”, American J. Sensor Technol., Vol. 4, pp. 30-34, 2017.[8]X. Li, C. Yang, S. Yang and G. Li, “Fiber-Optical Sensors: Basics and Applications in Multiphase Reactors”, Sensors, Vol. 12, pp. 12519-12544, 2012. |
| [8] | I. Garcia, J. Zubia, G. Durana, G. Aldabaldetreku, M. A. Illarramendi and J. Villatoro, “Optical Fiber Sensors for Aircraft Structural Health Monitoring”, Sensors, Vol. 15, pp. 15494-15519, 2015. |
| [9] | A. BARRIAS, J. R. CASAS and S. V. HERRERO, “Review of Civil Engineering Applications with Distributed Optical Fiber Sensors”, 8th European Workshop On Structural Health Monitoring (EWSHM 2016), 5-8 July 2016, Spain, Bilbao. |
| [10] | S. Yin, P. B. Ruffin and F. T. S. Yu, “Fiber optic sensors”, 2nd edn, Taylor & Francis Group, CRC Press (2008). |
| [11] | Kersey, A. D. A review of recent developments in fiber optic sensor technology. Opt. Fiber. Technol. 1996, 2, 291–317. |
| [12] | Grattan, K. T. V.; Sun, T. Fiber optic sensor technology: An overview. Sens. Actuators A: Phys.2000, 82, 40–61. |
| [13] | Lee, B. Review of the present status of optical fiber sensors. Opt. Fiber. Technol. 2003, 9, 57–79. |
| [14] | Yin, S. Z.; Ruffin, P. B.; Yu, F. T. S. Fiber Optic Sensors, 2nd ed.; CRC Press, Taylor & Francis Group: Boca Raton, FL, USA, 2008. |
| [15] | Fidanboylu, K.; Efendioglu, H. S. Fiber Optic Sensors and Their Applications. In Proc. of 5th Inter. Adv. Technol. Symposium (IATS’09), Karabuk, Turkey, 13–15 May 2009. |
| [16] | Jenny, R., Fundemantals of Fiber Optics: An Introduction for Beginners, Volpi Manufacturing USA Co., New York, 2000. |
| [17] | Casas J. R., and Paulo, J. S., Fiber Optic Sensors for Bridge Monitoring, Journal of Bridge Engineering, ASCE, 2003. |
| [18] | Connelly, M. C., Fiber Sensors, Elsevier Ltd., Limerick, 2005. |
APA Style
Hisham Kadhum Hisham. (2018). Optical Fiber Sensing Technology: Basics, Classifications and Applications. American Journal of Remote Sensing, 6(1), 1-5. https://doi.org/10.11648/j.ajrs.20180601.11
ACS Style
Hisham Kadhum Hisham. Optical Fiber Sensing Technology: Basics, Classifications and Applications. Am. J. Remote Sens. 2018, 6(1), 1-5. doi: 10.11648/j.ajrs.20180601.11
AMA Style
Hisham Kadhum Hisham. Optical Fiber Sensing Technology: Basics, Classifications and Applications. Am J Remote Sens. 2018;6(1):1-5. doi: 10.11648/j.ajrs.20180601.11
Share This Article
Twitter
Linked In
Facebook
Copy
Download@article{10.11648/j.ajrs.20180601.11,
author = {Hisham Kadhum Hisham},
title = {Optical Fiber Sensing Technology: Basics, Classifications and Applications},
journal = {American Journal of Remote Sensing},
volume = {6},
number = {1},
pages = {1-5},
doi = {10.11648/j.ajrs.20180601.11},
url = {https://doi.org/10.11648/j.ajrs.20180601.11},
eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ajrs.20180601.11},
abstract = {In this paper, the current state of art of optical fiber sensing technology is reviewed. The basics of operating principle are discussed in detailed and the various types of optical fiber sensors are classified. The performances, the limitations and a description of the technology used to fabricate the optical fiber sensors have presented. Also, the development of this technology and the expected application areas are briefly outlined.},
year = {2018}
}
TY - JOUR T1 - Optical Fiber Sensing Technology: Basics, Classifications and Applications AU - Hisham Kadhum Hisham Y1 - 2018/02/27 PY - 2018 N1 - https://doi.org/10.11648/j.ajrs.20180601.11 DO - 10.11648/j.ajrs.20180601.11 T2 - American Journal of Remote Sensing JF - American Journal of Remote Sensing JO - American Journal of Remote Sensing SP - 1 EP - 5 PB - Science Publishing Group SN - 2328-580X UR - https://doi.org/10.11648/j.ajrs.20180601.11 AB - In this paper, the current state of art of optical fiber sensing technology is reviewed. The basics of operating principle are discussed in detailed and the various types of optical fiber sensors are classified. The performances, the limitations and a description of the technology used to fabricate the optical fiber sensors have presented. Also, the development of this technology and the expected application areas are briefly outlined. VL - 6 IS - 1 ER -
Information
Email: