It is difficult to achieve dry and precise classification for fine sand characterized by small particle size, high content of micro-powder, and unstable gradation. In this study, a rectangle swing screen assisted by airflow & ultrasonic was employed to achieve precise classification of fine tailings. Through detailed process calculations and sample analysis, the following conclusions can be drawn: The movement trajectory of the fine sand within the rectangle swing screen follows a 360° parabolic path. The current theoretical formula for calculating the resistance coefficient of the transitional flow field within the airflow-assisted rectangle swing screen should be revised. After pre-dried, the magnetic tailings, vanadium-titanium magnetic tailings and molybdenum tailings were precise classified by the new multi-field coupled classifiers. The new classifiers enables the production of products with a mixed-grade rate of less than 5%. The classification efficiency is influenced by the inclination angle of the screen, the length of the sieve, the air velocity, the ultrasonic amplitude & etc., and parameters can be reasonably set according to engineering requirements. Furthermore, the prepared products have been successfully applied in the production of dry-mixed mortar and can be manufactured on a batch scale. The dry-mixed mortar containing tailings has been applied in urban renewal projects and has achieved good results.
| Published in | International Journal of Materials Science and Applications (Volume 14, Issue 6) |
| DOI | 10.11648/j.ijmsa.20251406.13 |
| Page(s) | 270-278 |
| Creative Commons |
This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited. |
| Copyright |
Copyright © The Author(s), 2025. Published by Science Publishing Group |
Tailings Sand, Classification, Rectangle Swing Screen, Airflow & Ultrasonic-assisted Classification
| [1] | Mingjing Yang, Jianheng Sun, Jing Yuan, et al. Iron tailing powder in cement-based composites: Evaluating filling effect from particle-size distribution [J]. Case Studies in Construction Materials, 2025, 23: e04919. |
| [2] | Jiajian Li, Shuai Cao, Weidong Song, et al. Visualization and quantification of pore structure in cement tailings waste rock composites using X-ray computed tomography and deep learning [J]. Construction and Building Materials, 2025, 476: 141341. |
| [3] | Jirong Lan, Yuwei Xiang, Siyu Zhao, et al. In-situ cementation backfill of alkali-inspired ultrafine copper tailings: Performance and principles [J]. Green and Smart Mining Engineering, 2025, 2: 122-132. |
| [4] | Shuai Wang, Chao Wang, Shuwei Li, et al. Recycling microfines of manufactured sand into fabricating robust highly flowable cement-tailings grout [J]. Process Safety and Environmental Protection, 2025, 195: 106837. |
| [5] | Zhimin Li, Pan Zhang, Minghui Sun, et al. Experimental study on the road performance of molybdenum tailings sand stabilized with cement and fly ash [J]. Case Studies in Construction Materials, 2024, 21: e03447. |
| [6] | Mingming Zhang, Henglin Lv, Qigang Jiang, et al. Study on flexural behavior of laminated slabs constructed with composite limestone powder-tailings mixed sand concrete [J]. Structures, 2025, 77: 109169. |
| [7] | Nan Yao, Yuancheng Zhu, Yicheng Ye, et al. Study on the strength improvement mechanism of fine-grained iron tailings cemented backfill after high temperature calcining [J]. Minerals Engineering, 2025, 227: 109259. |
| [8] | Meilin Jiang, Shuai Cao, Erol Yilmaz. Exploring microstructure and mechanical features of coupled cementitious tail-sand concrete by partial replacement of tungsten tailings [J]. Process Safety and Environmental Protection, 2024, 190: 863-875. |
| [9] | Chengwen Luan, Jun Liu, Shuo Zhao, et al. Enhancing the properties of UHPC with recycled concrete powder and iron ore tailings sand, and evaluating the environmental impact [J]. Construction and Building Materials, 2024, 452: 138769. |
| [10] | Yutao Li, Faning Dang, Mei Zhou, et al. Influence of molybdenum tailings replacing river sand on mechanical properties and concrete microstructure [J]. Construction and Building Materials, 2024, 435: 136897. |
| [11] | Sung-Ching Chen, Meng-Yao Gao, Wei-Ting Lin, et al. Study on the performance of highly doped copper tailings sand for concrete pavements using specific grading techniques [J]. Minerals Engineering, 2024, 216: 108836. |
| [12] | Hassan Amjad, El-Sayed Abd-Elaal, Xing Ma, et al. A critical review of iron ore tailings as cement and aggregate substitutes for robust infrastructure: Mechanical, durability, eco-economic, and social impacts [J]. Journal of Cleaner Production, 2025, 492: 144853. |
| [13] | Zhuo Xu, Cuiping Li, Bolin Xiao, et al. Development of slag-based filling cementitious materials and their application in ultrafine tailing sand filling [J]. Construction and Building Materials, 2024, 452: 138966. |
| [14] | Wen Bangchun, Liu Fengqiao, Liu Jie Design and commissioning of vibrating screen, vibrating feeder, and vibrating conveyor [M]. Beijing: Chemical Industry Press, 1989. In Chinese. |
| [15] | Xu Zhenwei, Zhang Yinxiang. The application of iron tailings sand in exterior wall insulation mortar [J]. Wall material innovation and building energy conservation, 2008, 7: 50-53. In Chinese. |
| [16] | Duan Xinhao, Zhang Chunhua. The Development Status and Trends of oscillating Screen [J]. Powder Technology in China, 2014, (10): 81-83. In Chinese. |
| [17] | Duan Xinhao, Qu Pengzhe, Liu Weixiang, et al. Analysis of screening efficiency of oscillating screen based on discrete element method [J]. Mining machinery, 2017, 1: 45-49. In Chinese. |
| [18] | Kan Hongfu, Wang Chuanguo. Selection of screening equipment for compound fertilizers [J]. Phosphate fertilizers and compound fertilizers, 2017, 7: 49-50. In Chinese. |
| [19] | Zhang Changsen. Powder Technology and Equipment [M]. Shanghai: East China University of Science and Technology Press, 2007. In Chinese. |
APA Style
Yinxiang, Z., Zhaojia, W., Junfu, Q., Ruifeng, Z., Yafeng, R. (2025). Research on Precise Classification Technology of Tailings Sand. International Journal of Materials Science and Applications, 14(6), 270-278. https://doi.org/10.11648/j.ijmsa.20251406.13
ACS Style
Yinxiang, Z.; Zhaojia, W.; Junfu, Q.; Ruifeng, Z.; Yafeng, R. Research on Precise Classification Technology of Tailings Sand. Int. J. Mater. Sci. Appl. 2025, 14(6), 270-278. doi: 10.11648/j.ijmsa.20251406.13
@article{10.11648/j.ijmsa.20251406.13,
author = {Zhang Yinxiang and Wang Zhaojia and Qiu Junfu and Zhang Ruifeng and Rui Yafeng},
title = {Research on Precise Classification Technology of Tailings Sand},
journal = {International Journal of Materials Science and Applications},
volume = {14},
number = {6},
pages = {270-278},
doi = {10.11648/j.ijmsa.20251406.13},
url = {https://doi.org/10.11648/j.ijmsa.20251406.13},
eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ijmsa.20251406.13},
abstract = {It is difficult to achieve dry and precise classification for fine sand characterized by small particle size, high content of micro-powder, and unstable gradation. In this study, a rectangle swing screen assisted by airflow & ultrasonic was employed to achieve precise classification of fine tailings. Through detailed process calculations and sample analysis, the following conclusions can be drawn: The movement trajectory of the fine sand within the rectangle swing screen follows a 360° parabolic path. The current theoretical formula for calculating the resistance coefficient of the transitional flow field within the airflow-assisted rectangle swing screen should be revised. After pre-dried, the magnetic tailings, vanadium-titanium magnetic tailings and molybdenum tailings were precise classified by the new multi-field coupled classifiers. The new classifiers enables the production of products with a mixed-grade rate of less than 5%. The classification efficiency is influenced by the inclination angle of the screen, the length of the sieve, the air velocity, the ultrasonic amplitude & etc., and parameters can be reasonably set according to engineering requirements. Furthermore, the prepared products have been successfully applied in the production of dry-mixed mortar and can be manufactured on a batch scale. The dry-mixed mortar containing tailings has been applied in urban renewal projects and has achieved good results.},
year = {2025}
}
TY - JOUR T1 - Research on Precise Classification Technology of Tailings Sand AU - Zhang Yinxiang AU - Wang Zhaojia AU - Qiu Junfu AU - Zhang Ruifeng AU - Rui Yafeng Y1 - 2025/12/29 PY - 2025 N1 - https://doi.org/10.11648/j.ijmsa.20251406.13 DO - 10.11648/j.ijmsa.20251406.13 T2 - International Journal of Materials Science and Applications JF - International Journal of Materials Science and Applications JO - International Journal of Materials Science and Applications SP - 270 EP - 278 PB - Science Publishing Group SN - 2327-2643 UR - https://doi.org/10.11648/j.ijmsa.20251406.13 AB - It is difficult to achieve dry and precise classification for fine sand characterized by small particle size, high content of micro-powder, and unstable gradation. In this study, a rectangle swing screen assisted by airflow & ultrasonic was employed to achieve precise classification of fine tailings. Through detailed process calculations and sample analysis, the following conclusions can be drawn: The movement trajectory of the fine sand within the rectangle swing screen follows a 360° parabolic path. The current theoretical formula for calculating the resistance coefficient of the transitional flow field within the airflow-assisted rectangle swing screen should be revised. After pre-dried, the magnetic tailings, vanadium-titanium magnetic tailings and molybdenum tailings were precise classified by the new multi-field coupled classifiers. The new classifiers enables the production of products with a mixed-grade rate of less than 5%. The classification efficiency is influenced by the inclination angle of the screen, the length of the sieve, the air velocity, the ultrasonic amplitude & etc., and parameters can be reasonably set according to engineering requirements. Furthermore, the prepared products have been successfully applied in the production of dry-mixed mortar and can be manufactured on a batch scale. The dry-mixed mortar containing tailings has been applied in urban renewal projects and has achieved good results. VL - 14 IS - 6 ER -