The Design of Shell-and-tube Heat Exchanger in the Project of the Coal Bed Methane Electrical Power Generation

Lan Xiangyun

doi:doi:10.11648/j.jcebe.20200402.14

| Peer-Reviewed

The Design of Shell-and-tube Heat Exchanger in the Project of the Coal Bed Methane Electrical Power Generation

Lan Xiangyun

Published in Journal of Chemical, Environmental and Biological Engineering (Volume 4, Issue 2)

Received: 24 April 2020 Accepted: 18 May 2020 Published: 23 July 2020

Views: Downloads:

Download PDF

Share This Article

Twitter
Linked In
Facebook

Abstract

Coal-bed-methane (CBD) electrical power generation is an active and effective measure to reduce emissions of greenhouse gases. Using shell-and-tube heat exchangers to reduce the water content of pipeline gas can improve the efficiency of the generator set. Designing heat exchanger by ASPEN EDR software can save a lot of manual calculation process, so as to improve the efficiency of the heat exchanger designer. The general method of designing and verifying shell-and-tube heat exchanger by EDR ASPEN software is described in this article by the example of the local process of low concentration gas power generation project. Because of the heat flux medium is low concentration coal bed methane with high explosion risk, anti-explosion measures must be taken to ensure safety beyond the requirements of normal heat exchangers of heat transfer, pressure drop.

Published in	Journal of Chemical, Environmental and Biological Engineering (Volume 4, Issue 2)
DOI	10.11648/j.jcebe.20200402.14
Page(s)	53-59
Creative Commons	This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.
Copyright	Copyright © The Author(s), 2020. Published by Science Publishing Group

Keywords

Shell-and-Tube Heat Exchanger, ASPEN EDR, Coal Bed Methane Electrical Power Generation, Gas Utilization, Greenhouse Gas

References

[1]	Liu, G P. (2010) Thermal Economic Analysis of Mine Cooling System for Gas Power Generation Waste Heat Refrigeration Mine [C]. Proceedings of 2010 Annual Conference of China Occupational Safety and Health Association. 346-351.
[2]	Dong Q W, Zhang Y. (2008) Heat Exchanger [M]. Chemical Industry Press, Beijing.
[3]	Fu L, Zeng D L, Tang K L, Jia H Y. (2012) Numerical Simulation Study of Shell-Side Fluid Flow and Heat Transfer in Shell-and-Tube Heat Exchanger [J]. Pressure Vessel Technology. 0536-41.
[4]	Qi H Y, Gao L, Zhang Y Y, Zhou C L. (2012) Overview of the Shell and Tube Heat Exchangers about Heat Transfer Enhancement Technology [J]. Pressure Vessel Technology. 0773-78.
[5]	Feng G H, Cao Y Z, Hao H. (2009) Research progress of heat transfer enhancement of shell-and-tube heat exchanger [J]. Technology & Development of Chemical Industry. 0641-45.
[6]	China National Standardization Management Committee. GB/T 151-2014, Heat exchanger [S].
[7]	Xu C, Liu H H, Wang W J. (2009) The Research and Analysis of the Theoretical Calculation of Gas Explosion Limit and Its Influence Factors [J]. Shandong Coal Science and Technology. 4154-155.
[8]	Zhao J K, Wang L, Hua S, Cao X. (2012) Numerical Simulation Study on Effect of Gas Concentration upon Gas Explosion [J]. Mining Safety & Environmental Protection. 041-4+92.
[9]	Zhang Z S, Yang C L. (2012) Application of Aspen Plus in chemical industry [J]. Guangdong Chemical Industry. 39 (4) 77-78.
[10]	Anonymous. RealPennies.com: Turning Pennies into dollars: (OTC: AZPN) Aspen Technology, Inc [J]. M2 Presswire, 2009.
[11]	Qian S W. (2002) Heat Exchanger Design Manual [M]. Chemical Industry Press, Beijing.
[12]	Dang W Y, Yu A F. (2010) Study on the Design Pressure for Water-sealed Drum in Refinery Flare System [J]. China Safety Science Journal. 0975-80.
[13]	Ma Z B. (2014) Research Status and Development Trend of Explosion Suppression Technology in Coal Mine [J]. Mining Safety & Environmental Protection. 41 (2) 83-85.
[14]	Xue S Q. (2010) Discussions on the development of automatic explosion suppression technology [J]. Mining Safety & Environmental Protection. 0574-75.
[15]	Huo C X. (2014) Analysis and Discussion on Explosion Accidents in Coal Mine Gas Pipeline [J]. Mining Safety & Environmental Protection. 0191-94.

Cite This Article

Plain Text BibTeX RIS

APA Style

Lan Xiangyun. (2020). The Design of Shell-and-tube Heat Exchanger in the Project of the Coal Bed Methane Electrical Power Generation. Journal of Chemical, Environmental and Biological Engineering, 4(2), 53-59. https://doi.org/10.11648/j.jcebe.20200402.14

Copy | Download

ACS Style

Lan Xiangyun. The Design of Shell-and-tube Heat Exchanger in the Project of the Coal Bed Methane Electrical Power Generation. J. Chem. Environ. Biol. Eng. 2020, 4(2), 53-59. doi: 10.11648/j.jcebe.20200402.14

Copy | Download

AMA Style

Lan Xiangyun. The Design of Shell-and-tube Heat Exchanger in the Project of the Coal Bed Methane Electrical Power Generation. J Chem Environ Biol Eng. 2020;4(2):53-59. doi: 10.11648/j.jcebe.20200402.14

Copy | Download

@article{10.11648/j.jcebe.20200402.14,
  author = {Lan Xiangyun},
  title = {The Design of Shell-and-tube Heat Exchanger in the Project of the Coal Bed Methane Electrical Power Generation},
  journal = {Journal of Chemical, Environmental and Biological Engineering},
  volume = {4},
  number = {2},
  pages = {53-59},
  doi = {10.11648/j.jcebe.20200402.14},
  url = {https://doi.org/10.11648/j.jcebe.20200402.14},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.jcebe.20200402.14},
  abstract = {Coal-bed-methane (CBD) electrical power generation is an active and effective measure to reduce emissions of greenhouse gases. Using shell-and-tube heat exchangers to reduce the water content of pipeline gas can improve the efficiency of the generator set. Designing heat exchanger by ASPEN EDR software can save a lot of manual calculation process, so as to improve the efficiency of the heat exchanger designer. The general method of designing and verifying shell-and-tube heat exchanger by EDR ASPEN software is described in this article by the example of the local process of low concentration gas power generation project. Because of the heat flux medium is low concentration coal bed methane with high explosion risk, anti-explosion measures must be taken to ensure safety beyond the requirements of normal heat exchangers of heat transfer, pressure drop.},
 year = {2020}
}

Copy | Download

TY  - JOUR
T1  - The Design of Shell-and-tube Heat Exchanger in the Project of the Coal Bed Methane Electrical Power Generation
AU  - Lan Xiangyun
Y1  - 2020/07/23
PY  - 2020
N1  - https://doi.org/10.11648/j.jcebe.20200402.14
DO  - 10.11648/j.jcebe.20200402.14
T2  - Journal of Chemical, Environmental and Biological Engineering
JF  - Journal of Chemical, Environmental and Biological Engineering
JO  - Journal of Chemical, Environmental and Biological Engineering
SP  - 53
EP  - 59
PB  - Science Publishing Group
SN  - 2640-267X
UR  - https://doi.org/10.11648/j.jcebe.20200402.14
AB  - Coal-bed-methane (CBD) electrical power generation is an active and effective measure to reduce emissions of greenhouse gases. Using shell-and-tube heat exchangers to reduce the water content of pipeline gas can improve the efficiency of the generator set. Designing heat exchanger by ASPEN EDR software can save a lot of manual calculation process, so as to improve the efficiency of the heat exchanger designer. The general method of designing and verifying shell-and-tube heat exchanger by EDR ASPEN software is described in this article by the example of the local process of low concentration gas power generation project. Because of the heat flux medium is low concentration coal bed methane with high explosion risk, anti-explosion measures must be taken to ensure safety beyond the requirements of normal heat exchangers of heat transfer, pressure drop.
VL  - 4
IS  - 2
ER  -

Copy | Download

Author Information

Lan Xiangyun

State Key Laboratory of Gas Desaster Monitoring and Emergency Technology, Chongqing China

Download PDF

Sections

Plain Text BibTeX RIS

APA Style

Lan Xiangyun. (2020). The Design of Shell-and-tube Heat Exchanger in the Project of the Coal Bed Methane Electrical Power Generation. Journal of Chemical, Environmental and Biological Engineering, 4(2), 53-59. https://doi.org/10.11648/j.jcebe.20200402.14

Copy | Download

ACS Style

Lan Xiangyun. The Design of Shell-and-tube Heat Exchanger in the Project of the Coal Bed Methane Electrical Power Generation. J. Chem. Environ. Biol. Eng. 2020, 4(2), 53-59. doi: 10.11648/j.jcebe.20200402.14

Copy | Download

AMA Style

Lan Xiangyun. The Design of Shell-and-tube Heat Exchanger in the Project of the Coal Bed Methane Electrical Power Generation. J Chem Environ Biol Eng. 2020;4(2):53-59. doi: 10.11648/j.jcebe.20200402.14

Copy | Download

@article{10.11648/j.jcebe.20200402.14,
  author = {Lan Xiangyun},
  title = {The Design of Shell-and-tube Heat Exchanger in the Project of the Coal Bed Methane Electrical Power Generation},
  journal = {Journal of Chemical, Environmental and Biological Engineering},
  volume = {4},
  number = {2},
  pages = {53-59},
  doi = {10.11648/j.jcebe.20200402.14},
  url = {https://doi.org/10.11648/j.jcebe.20200402.14},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.jcebe.20200402.14},
  abstract = {Coal-bed-methane (CBD) electrical power generation is an active and effective measure to reduce emissions of greenhouse gases. Using shell-and-tube heat exchangers to reduce the water content of pipeline gas can improve the efficiency of the generator set. Designing heat exchanger by ASPEN EDR software can save a lot of manual calculation process, so as to improve the efficiency of the heat exchanger designer. The general method of designing and verifying shell-and-tube heat exchanger by EDR ASPEN software is described in this article by the example of the local process of low concentration gas power generation project. Because of the heat flux medium is low concentration coal bed methane with high explosion risk, anti-explosion measures must be taken to ensure safety beyond the requirements of normal heat exchangers of heat transfer, pressure drop.},
 year = {2020}
}

Copy | Download

TY  - JOUR
T1  - The Design of Shell-and-tube Heat Exchanger in the Project of the Coal Bed Methane Electrical Power Generation
AU  - Lan Xiangyun
Y1  - 2020/07/23
PY  - 2020
N1  - https://doi.org/10.11648/j.jcebe.20200402.14
DO  - 10.11648/j.jcebe.20200402.14
T2  - Journal of Chemical, Environmental and Biological Engineering
JF  - Journal of Chemical, Environmental and Biological Engineering
JO  - Journal of Chemical, Environmental and Biological Engineering
SP  - 53
EP  - 59
PB  - Science Publishing Group
SN  - 2640-267X
UR  - https://doi.org/10.11648/j.jcebe.20200402.14
AB  - Coal-bed-methane (CBD) electrical power generation is an active and effective measure to reduce emissions of greenhouse gases. Using shell-and-tube heat exchangers to reduce the water content of pipeline gas can improve the efficiency of the generator set. Designing heat exchanger by ASPEN EDR software can save a lot of manual calculation process, so as to improve the efficiency of the heat exchanger designer. The general method of designing and verifying shell-and-tube heat exchanger by EDR ASPEN software is described in this article by the example of the local process of low concentration gas power generation project. Because of the heat flux medium is low concentration coal bed methane with high explosion risk, anti-explosion measures must be taken to ensure safety beyond the requirements of normal heat exchangers of heat transfer, pressure drop.
VL  - 4
IS  - 2
ER  -

Copy | Download