Effect of Curing Agent Dosage on Fire Resistance of Waterborne Epoxy Coating

Jingying Wang; Rongrong Zheng; Xingwei Li; Hongjing Liu; Liyan Wang

doi:doi:10.11648/j.ajpst.20220801.14

| Peer-Reviewed

Effect of Curing Agent Dosage on Fire Resistance of Waterborne Epoxy Coating

Jingying Wang, Rongrong Zheng, Xingwei Li, Hongjing Liu, Liyan Wang

Published in American Journal of Polymer Science and Technology (Volume 8, Issue 1)

Received: 22 February 2022 Accepted: 10 March 2022 Published: 18 March 2022

Views: Downloads:

Download PDF

Share This Article

Twitter
Linked In
Facebook

Abstract

The water-based epoxy fire retardant coating is formed by reaction curing, which not only has good anti-corrosion performance, but also has environmental protection and flame retardant performance, which is suitable for construction machinery painting or steel structure buildings. However, the curing and cross-linking process of water-based epoxy coatings is centered on the curing agent, which gradually diffuses into the epoxy resin particles. The curing agent molecules first contact the surface of the epoxy resin dispersed phase particles and undergo a cross-linking curing reaction. As the reaction progresses, the relative molecular weight and glass transition temperature of the epoxy resin on the particle surface gradually increase, so that the diffusion rate of the curing agent molecules into the particles gradually slows down, which means that the curing reaction inside the epoxy resin dispersed phase particles Less than its surface, resulting in a low internal crosslink density, and ultimately not all epoxy groups have the opportunity to interact with the activating groups of the curing agent. Therefore, this paper studies different proportions of waterborne epoxy emulsion and curing agent. The results show that when m (epoxy emulsion): m (curing agent) = 7:3, the fire resistance and comprehensive performance of the coating are the best.

Published in	American Journal of Polymer Science and Technology (Volume 8, Issue 1)
DOI	10.11648/j.ajpst.20220801.14
Page(s)	16-20
Creative Commons	This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.
Copyright	Copyright © The Author(s), 2024. Published by Science Publishing Group

Keywords

Dosage of Curing Agent, Waterborne Epoxy Paint, Fire Performance

References

[1]	Xu Jie, Min Jie, Gu Guangxin, Wang Zhendong, Sun Shuyuan. (2014) The effect of curing agent dosage on the performance of waterborne epoxy coatings. Coatings Industry, 44 (07): 41-45.
[2]	Shi Jun. (2019) Preparation and performance study of water-based steel structure coatings. Shenyang Jianzhu University.
[3]	Zhao Wei. (2021)Curing behavior of epoxy resin and preparation of waterborne emulsion. Zhejiang University.
[4]	Feng Weihua. (2019) Study on preparation of waterborne epoxy resin based expansive fireproof coating for offshore platform steel structure. Beijing University of Chemical Technology.
[5]	Fan Yanhao. (2020)Preparation of temperature-controlled crosslinking network epoxy resin and its application in fireproof coatings. Beijing University of Chemical Technology.
[6]	Wang Ke. (2015) Preparation and performance study of water-based intumescent fire-retardant coatings for steel structures. Beijing Institute of Technology.
[7]	Li Chongyi. (2011)Preparation and performance of water-based ultra-thin steel structure fireproof coating. South China University of Technology.
[8]	Guo Junhong. (2008) Development of ultra-thin intumescent fire-retardant coatings for steel structures. Lanzhou University of Technology.
[9]	Zhang Kaixiang, Ma Chen, Guan Junfang, Wang Guojian. (2010) The effect of amine curing agents on the performance of waterborne epoxy steel structure fireproof coatings. Modern Coatings & Painting, 11: 7-11.
[10]	Du Kemin. Current status and development of fire retardant coatings. (2010) Modern Coatings and Painting, 07: 11-14.
[11]	Xu Qianwei, Sun Dong, Wang Guojian, Zhang Qiaofen. (2010) The influence of base resin on the fire performance of steel structure fire retardant coatings. Coatings Industry, 07: 53-57.
[12]	Cui Jinfeng, Du Yong, Guo Junhong, Zhou Yingping, Yang Baoping. (2010) Development of ultra-thin bromo-carbon phenolic epoxy fire-retardant coating for steel structure. Coatings Industry, 06: 9-12.
[13]	Lin Hongyan, Wang Chuncai, Yang Hongwei. (2010) Study on the formulation of water-based fire retardant coatings. Coatings Industry, 05: 63-65.
[14]	Wang Guojian, Qian Hui. (2010) The effect of curing agent on the properties of ultra-thin intumescent waterborne epoxy fire-retardant coatings for steel structures. Shanghai Paint, 02: 1-4.
[15]	Liu Mingdong. (2021) Study on preparation and properties of ultra-thin fire retardant coatings for steel structures. Dalian University of Technology.

Cite This Article

Plain Text BibTeX RIS

APA Style

Jingying Wang, Rongrong Zheng, Xingwei Li, Hongjing Liu, Liyan Wang. (2022). Effect of Curing Agent Dosage on Fire Resistance of Waterborne Epoxy Coating. American Journal of Polymer Science and Technology, 8(1), 16-20. https://doi.org/10.11648/j.ajpst.20220801.14

Copy | Download

ACS Style

Jingying Wang; Rongrong Zheng; Xingwei Li; Hongjing Liu; Liyan Wang. Effect of Curing Agent Dosage on Fire Resistance of Waterborne Epoxy Coating. Am. J. Polym. Sci. Technol. 2022, 8(1), 16-20. doi: 10.11648/j.ajpst.20220801.14

Copy | Download

AMA Style

Jingying Wang, Rongrong Zheng, Xingwei Li, Hongjing Liu, Liyan Wang. Effect of Curing Agent Dosage on Fire Resistance of Waterborne Epoxy Coating. Am J Polym Sci Technol. 2022;8(1):16-20. doi: 10.11648/j.ajpst.20220801.14

Copy | Download

@article{10.11648/j.ajpst.20220801.14,
  author = {Jingying Wang and Rongrong Zheng and Xingwei Li and Hongjing Liu and Liyan Wang},
  title = {Effect of Curing Agent Dosage on Fire Resistance of Waterborne Epoxy Coating},
  journal = {American Journal of Polymer Science and Technology},
  volume = {8},
  number = {1},
  pages = {16-20},
  doi = {10.11648/j.ajpst.20220801.14},
  url = {https://doi.org/10.11648/j.ajpst.20220801.14},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ajpst.20220801.14},
  abstract = {The water-based epoxy fire retardant coating is formed by reaction curing, which not only has good anti-corrosion performance, but also has environmental protection and flame retardant performance, which is suitable for construction machinery painting or steel structure buildings. However, the curing and cross-linking process of water-based epoxy coatings is centered on the curing agent, which gradually diffuses into the epoxy resin particles. The curing agent molecules first contact the surface of the epoxy resin dispersed phase particles and undergo a cross-linking curing reaction. As the reaction progresses, the relative molecular weight and glass transition temperature of the epoxy resin on the particle surface gradually increase, so that the diffusion rate of the curing agent molecules into the particles gradually slows down, which means that the curing reaction inside the epoxy resin dispersed phase particles Less than its surface, resulting in a low internal crosslink density, and ultimately not all epoxy groups have the opportunity to interact with the activating groups of the curing agent. Therefore, this paper studies different proportions of waterborne epoxy emulsion and curing agent. The results show that when m (epoxy emulsion): m (curing agent) = 7:3, the fire resistance and comprehensive performance of the coating are the best.},
 year = {2022}
}

Copy | Download

TY  - JOUR
T1  - Effect of Curing Agent Dosage on Fire Resistance of Waterborne Epoxy Coating
AU  - Jingying Wang
AU  - Rongrong Zheng
AU  - Xingwei Li
AU  - Hongjing Liu
AU  - Liyan Wang
Y1  - 2022/03/18
PY  - 2022
N1  - https://doi.org/10.11648/j.ajpst.20220801.14
DO  - 10.11648/j.ajpst.20220801.14
T2  - American Journal of Polymer Science and Technology
JF  - American Journal of Polymer Science and Technology
JO  - American Journal of Polymer Science and Technology
SP  - 16
EP  - 20
PB  - Science Publishing Group
SN  - 2575-5986
UR  - https://doi.org/10.11648/j.ajpst.20220801.14
AB  - The water-based epoxy fire retardant coating is formed by reaction curing, which not only has good anti-corrosion performance, but also has environmental protection and flame retardant performance, which is suitable for construction machinery painting or steel structure buildings. However, the curing and cross-linking process of water-based epoxy coatings is centered on the curing agent, which gradually diffuses into the epoxy resin particles. The curing agent molecules first contact the surface of the epoxy resin dispersed phase particles and undergo a cross-linking curing reaction. As the reaction progresses, the relative molecular weight and glass transition temperature of the epoxy resin on the particle surface gradually increase, so that the diffusion rate of the curing agent molecules into the particles gradually slows down, which means that the curing reaction inside the epoxy resin dispersed phase particles Less than its surface, resulting in a low internal crosslink density, and ultimately not all epoxy groups have the opportunity to interact with the activating groups of the curing agent. Therefore, this paper studies different proportions of waterborne epoxy emulsion and curing agent. The results show that when m (epoxy emulsion): m (curing agent) = 7:3, the fire resistance and comprehensive performance of the coating are the best.
VL  - 8
IS  - 1
ER  -

Copy | Download

Author Information

Jingying Wang

School of Petrochemical Engineering, Shenyang University of Technology, Shenyang, P. R. China
Rongrong Zheng

School of Petrochemical Engineering, Shenyang University of Technology, Shenyang, P. R. China
Xingwei Li

Liaoning Inspection, Testing and Certification Center, Shenyang, P. R. China
Hongjing Liu

School of Petrochemical Engineering, Shenyang University of Technology, Shenyang, P. R. China
Liyan Wang

School of Petrochemical Engineering, Shenyang University of Technology, Shenyang, P. R. China

Download PDF

Sections

Plain Text BibTeX RIS

APA Style

Jingying Wang, Rongrong Zheng, Xingwei Li, Hongjing Liu, Liyan Wang. (2022). Effect of Curing Agent Dosage on Fire Resistance of Waterborne Epoxy Coating. American Journal of Polymer Science and Technology, 8(1), 16-20. https://doi.org/10.11648/j.ajpst.20220801.14

Copy | Download

ACS Style

Jingying Wang; Rongrong Zheng; Xingwei Li; Hongjing Liu; Liyan Wang. Effect of Curing Agent Dosage on Fire Resistance of Waterborne Epoxy Coating. Am. J. Polym. Sci. Technol. 2022, 8(1), 16-20. doi: 10.11648/j.ajpst.20220801.14

Copy | Download

AMA Style

Jingying Wang, Rongrong Zheng, Xingwei Li, Hongjing Liu, Liyan Wang. Effect of Curing Agent Dosage on Fire Resistance of Waterborne Epoxy Coating. Am J Polym Sci Technol. 2022;8(1):16-20. doi: 10.11648/j.ajpst.20220801.14

Copy | Download

@article{10.11648/j.ajpst.20220801.14,
  author = {Jingying Wang and Rongrong Zheng and Xingwei Li and Hongjing Liu and Liyan Wang},
  title = {Effect of Curing Agent Dosage on Fire Resistance of Waterborne Epoxy Coating},
  journal = {American Journal of Polymer Science and Technology},
  volume = {8},
  number = {1},
  pages = {16-20},
  doi = {10.11648/j.ajpst.20220801.14},
  url = {https://doi.org/10.11648/j.ajpst.20220801.14},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ajpst.20220801.14},
  abstract = {The water-based epoxy fire retardant coating is formed by reaction curing, which not only has good anti-corrosion performance, but also has environmental protection and flame retardant performance, which is suitable for construction machinery painting or steel structure buildings. However, the curing and cross-linking process of water-based epoxy coatings is centered on the curing agent, which gradually diffuses into the epoxy resin particles. The curing agent molecules first contact the surface of the epoxy resin dispersed phase particles and undergo a cross-linking curing reaction. As the reaction progresses, the relative molecular weight and glass transition temperature of the epoxy resin on the particle surface gradually increase, so that the diffusion rate of the curing agent molecules into the particles gradually slows down, which means that the curing reaction inside the epoxy resin dispersed phase particles Less than its surface, resulting in a low internal crosslink density, and ultimately not all epoxy groups have the opportunity to interact with the activating groups of the curing agent. Therefore, this paper studies different proportions of waterborne epoxy emulsion and curing agent. The results show that when m (epoxy emulsion): m (curing agent) = 7:3, the fire resistance and comprehensive performance of the coating are the best.},
 year = {2022}
}

Copy | Download

TY  - JOUR
T1  - Effect of Curing Agent Dosage on Fire Resistance of Waterborne Epoxy Coating
AU  - Jingying Wang
AU  - Rongrong Zheng
AU  - Xingwei Li
AU  - Hongjing Liu
AU  - Liyan Wang
Y1  - 2022/03/18
PY  - 2022
N1  - https://doi.org/10.11648/j.ajpst.20220801.14
DO  - 10.11648/j.ajpst.20220801.14
T2  - American Journal of Polymer Science and Technology
JF  - American Journal of Polymer Science and Technology
JO  - American Journal of Polymer Science and Technology
SP  - 16
EP  - 20
PB  - Science Publishing Group
SN  - 2575-5986
UR  - https://doi.org/10.11648/j.ajpst.20220801.14
AB  - The water-based epoxy fire retardant coating is formed by reaction curing, which not only has good anti-corrosion performance, but also has environmental protection and flame retardant performance, which is suitable for construction machinery painting or steel structure buildings. However, the curing and cross-linking process of water-based epoxy coatings is centered on the curing agent, which gradually diffuses into the epoxy resin particles. The curing agent molecules first contact the surface of the epoxy resin dispersed phase particles and undergo a cross-linking curing reaction. As the reaction progresses, the relative molecular weight and glass transition temperature of the epoxy resin on the particle surface gradually increase, so that the diffusion rate of the curing agent molecules into the particles gradually slows down, which means that the curing reaction inside the epoxy resin dispersed phase particles Less than its surface, resulting in a low internal crosslink density, and ultimately not all epoxy groups have the opportunity to interact with the activating groups of the curing agent. Therefore, this paper studies different proportions of waterborne epoxy emulsion and curing agent. The results show that when m (epoxy emulsion): m (curing agent) = 7:3, the fire resistance and comprehensive performance of the coating are the best.
VL  - 8
IS  - 1
ER  -

Copy | Download