Research Article
Physicochemical Quality Evaluation of Commercial Soaps Marketed in North Western Nigeria
Ibrahim Ladan Garba*
,
Ahmad Mohammad,
Abdullahi Mohammad,
Yusuf Muhammad Bawa
,
Mohammed Adamu Garga
,
Ibrahim Bako,
Idris Muhammad,
Nuraddeen Muhammad Hassan
,
Auwalu Yakubu,
Yasser Muhammad Abdulkarim,
Lukman Mudi Hamza
Issue:
Volume 14, Issue 6, December 2026
Pages:
109-120
Received:
7 May 2026
Accepted:
22 May 2026
Published:
16 November 2026
DOI:
10.11648/j.ajac.20261406.11
Downloads:
Views:
Abstract: This research evaluated the physicochemical properties of selected commercial soaps sourced from prominent markets in north-western Nigeria. A total of forty soap samples including toilet, laundry, medicated, and multipurpose soaps, were randomly acquired from central markets located in Katsina State, Kano State, Kaduna State, and Jigawa State. The samples were transported to the laboratory, grated and underwent physicochemical analysis following standard analytical methods. The parameters assessed included total fatty matter(TFM), alcohol insoluble matter(AI), free alkali(FA), pH, moisture content(MC), and hardness(Hdn). Total fatty matter values were found to range from 54.13% to75.36% in toilet soaps, 45.38% to76.09% in laundry soaps, 68.32% to 78.55% in medicated soaps, and 58.46% to 76.09% in multipurpose soaps. Several samples met or surpassed the recommended limits set by the Standards Organisation of Nigeria. However, some products displayed high levels of alcohol insoluble matter and free alkali, which could potentially impact product quality and skin compatibility. The pH values varied from 6.45 to 9.58, indicating a range from mildly acidic to strongly alkaline, with several samples exceeding the recommended pH range for skin-friendly soaps. Moisture content and hardness also exhibited significant variation among the samples analyzed. Analysis of variance (ANOVA) revealed no significant differences (p>0.05) among the soap categories concerning the measured physicochemical parameters. Correlation analysis demonstrated a strong negative correlation between TFM and AI (r=−0.619, p<0.01), indicating that higher fatty matter content was associated with lower levels of insoluble materials. Additionally, moisture content showed a very strong positive correlation with hardness (r=0.947, p<0.01), while moderate positive correlations were noted between pH and other parameters.
Abstract: This research evaluated the physicochemical properties of selected commercial soaps sourced from prominent markets in north-western Nigeria. A total of forty soap samples including toilet, laundry, medicated, and multipurpose soaps, were randomly acquired from central markets located in Katsina State, Kano State, Kaduna State, and Jigawa State. The...
Show More